References
Raynor, G.V., unpublished report.
Pfeil, P.C.L, J. Inst. Met., Vol. 77, p. 553, 1950.
Pfeil, L.B., in “Advances in Materials Re search in the NATO Nations,” ed. H. Brooks et al. (published for AGARD by Pergamon Press, Oxford), p. 407, 1963.
Jenkins, C.H.M. and Tapsell, H.J., J. Iron & Steel Ins., Vol. 123, p. 313, 1931.
Taylor, A. and Floyd, R.W., J. Inst. Metals, Vol. 80, p. 577, 1951–52.
Sims, C.T., JOURNAL OF METALS, p. 1119, Oct. 1966.
Woodyatt, L.R., Sims, C.T. and Beattie, Jr., H.J., Trans. Met. Soc. AIME, Vol. 236, p. 519, 1966. Also Murphy, H.J., Sims, C.T. and Beltra, H M., JOURNAL OF METALS, Vol. 20, p. 46, 1968.
Davies, R.G. and Johnston, T.L., “Ordered Alloys Structural Application and Physical Metallurgy,” Proc. 3rd Bolton Landing Conference, (Kear, B.H., et al., eds.) Claitor’s Publishing Division, Baton Rouge, La., 1970.
Greenwood, G.W., “The Mechanism of Phase Transformations in Crystalline Solids,” IoM Monograph No. 33, p. 103. The Institute of Metals, London, 1969.
Ardell, A.J., as ref. 10, p. 111.
Grant, N.J., “Strengthening of Metals,” p. 163, (D. Peckner, ed.) Reinhold, New York, 1964.
Gemmill, M.G., “The Technology and Properties of Ferrous Alloys for High-Temperature Use,” p. 89, Newnes, London, 1966.
Stumpf, W.E. and Sellars, CM., as ref. 10, p. 120.
Beardmore, P., Davies, R.G. and Johnston, T.L., Trans. Met. Soc. AIME, Vol. 245, p. 1537, 1969.
Ham, R.K., as ref. 9, p. 365.
Brown, L.M. and Ham, R.K., “Strengthening Methods in Crystals,” ch. 2, Elsevier, Amsterdam, 1971.
Westbrook, J.H., as ref. 9, p. 1.
Thornton, P.H., Davies, R.G. and Johnston, T.L., Met. Trans. Vol. 1, p. 207, 1970; Thornton, P.H., Ibid, Vol. 3, p. 291, 1972.
Nicholson, R.B., as ref. 17, ch. 10.
Blackburn, M.J. and Williams, J.C., Trans. ASM, Vol. 62, p. 398, 1969.
Mirkin, I.L. and Kancheev, O.D., Met. I Obrabot. Term., parts 1 and 2, p. 10 (quoted in ref. 9), 1967.
Maniar, G.N. and Bridge, Jr., J.E., Met. Trans., Vol. 2, p. 95, 1971; Metallography, Vol. 5, p. 91, 1972.
Ansell, G.S., “Physical Metallurgy,” p. 1083 (Cahn, R.W., Ed.), 2nd edition, North-Holland Publishing Co., Amsterdam, 1970.
Hirsch, P.B. and Humphreys, F.J., Proc. Roy. Soc, Vol. 318A, pp. 45, 73, 1970.
Hirsch, P.B. and Humphreys, F.J., “Physics of Strength and Plasticity,” ch. 15, (Ali Argon, Ed.), M.I.T. Press, Cambridge, Mass., 1969.
Edelson, B.E. and Baldwin, Jr., W.M., Trans. Amer. Soc. Metals, Vol. 55, p. 230, 1962.
Cahn, R.W., “Composite Materials,” p. 65, (L. Holliday, Ed.), Elsevier, Amsterdam, 1966.
Chen, E.S., Lakshininarayanan, G.R. and Sautter, F.K., Met. Trans., Vol. 2, p. 937, 1971.
Betteridge, W., Powder Met., Vol. 14, p. 142, 1964.
Gimpl, M.L. and Fuschillo, N., JOURNAL OF METALS, p. 39, June 1971.
Poniatowski, M. and Clasing, M., Z. Metallkunde, Vol. 59, p. 165, 1968.
Rapp, R.A., Corrosion, Vol. 21, p. 382, 1965.
Dew-Hughes, D., Mafer. Sci. & Eng., Vol. 1, p. 2, 1966.
Livingston, J.D., Cline, H.E., Koch, E.F. and Russell, R.R., Acta Met., Vol. 18, p. 399, 1970.
Cline, H.E., Walter, J.L., Lifshitz, E. and Russell, R.R., Met. Trans., Vol. 2, p. 189, 1971.
Mollard, F.R. and Flemings, M.C., Trans. Met. Soc. AIME, Vol. 239, p. 1534, 1967.
Cline, H.E. and Livingston, J.D., Trans. Met. Soc. AIME, Vol. 245, p. 1987, 1969.
Cooksey, D.J.S. and Hellawell, A., J. Inst. Metals, Vol. 95, p. 183, 1967.
Livingston, J.D., J. Mater. Scl., Vol. 5, p. 951, 1970.
Hertzberg, R.W., Lemkey, F.D. and Ford, J.A., Trans. Met. Soc. AIME, Vol. 233, p. 342, 1965.
Davies, G.J., in “High-Strength Materials,” p. 603, (V.F. Zackay, Ed.), Wiley, New York, 1965.
Kraft, R.W., JOURNAL OF METALS, Vol. 18, p. 192, 1966.
Bever, M.B., Duwez, P.E. and Tiller, W.A., Mater. Scl. & Eng., Vol. 6, p. 147, 1970.
Livinqston, J.D., Mater. Sci. & Eng., Vol. 7, p. 61, 1971.
Barclay, R.S., Kerr, H.W. and Niessen, P., J. Mater. Sci., Vol. 6, p. 1168, 1971.
Lemkey, F.D. and Thompson, E.R., Met. Trans., Vol. 1, p. 2799, 1970.
Sahm, P.R. and Lorenz, M., J. Mater. Sci., Vol. 7, p. 793, 1972.
Davies, G.J., as ref. 17, ch. 9.
Nicholson, R.B. and Davies, G.J., “Structural Characteristics of Materials,” p. 199, (H.M. Finniston, Ed.), Elsevier, Amsterdam, 1971.
Cochardt, A.W., Trans. Am. Soc. Mech. Eng., Vol. 75A, p. 196, 1953.
Cochardt, A.W., “Magnetic Properties of Metals and Alloys,” p. 251, Amer. Soc. Metals, Cleveland, 1959.
Smith, G.W. and Birbhak, J.R., J. Appl. Phys., Vol. 39, p. 2311, 1968.
Goodwin, R.J., Metal Scl. J., Vol. 2, p. 121, 1968.
Hedley, J.A., Metal Scl. J., Vol. 2, p. 129, 1968.
Buehler, W.J. and Wang, F.E., Ocean Engineering, Vol. 1, p. 105, 1968.
Duckworth, W.E., Met. Reviews, Vol. 13, p. 128, 1968.
Honeycombe, R.W.K., Harding, H.J. and Irani, S.J., in ref. 40, p. 213.
Hall, A.M., in Modern Materials, Vol. 4, p. 327, Academic Press, New York, 1964.
Thomas, G., Schmatz, D. and Gerberich, W., in ref. 40, p. 251.
Decker, R.F., Novak, C.J. and Landig, T.W., JOURNAL OF METALS, p. 60, Nov. 1967.
Hannay, W.B. (interview), Bell Laboratories Record, Feb. 1969.
Additional information
Robert W. CahnTMS has been Professor of Materials Science at the University of Sussex in England since 1965. He built up the new Materials Science School at Sussex, was previously with the Physical Metallurgy Dept. at Birmingham University. He co-edits the Journal of Materials Science and the Journal of Nuclear Materials.
Rights and permissions
About this article
Cite this article
Cahn, R.W. Modern practice in the design of strong alloys. JOM 25, 28–37 (1973). https://doi.org/10.1007/BF03355826
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03355826