Abstract
Battelle-Columbus has a computer program for study of blast furnace operation.
Similar content being viewed by others
References
Flint, R. V.; “Effect of Burden Materials and Practices on Blast Furnace Coke Rate”, Blast Furnace and Steel Plant, Vol. 50, no. 1, pp. 47–58 and 74–76, January, 1962.
[For example] Barnes, T.M., and Nagan, R.A.; “The Use of Illinois Coal at Interlake’s Chicago Plant”, Blast Furnace and Steel Plant, Vol. 55, No. 1, pp. 26–31, January, 1967.
Gee, K.H.; “Use of Iron Temperature and Rapid Slag Analysis to Improve Furnace Control”, Ironmaking Proceedings, Vol. 22, pp. 155–165, 1963.
Christman, R.G.; “Use of Linear Programming for Combined Distribution of Ore and Coal”, Blast Furnace and Steel Plant, Vol. 58, no. 2, pp. 112–117, February, 1970.
IBM Corporation; Linear Programming—Blast Furnace Burdening and Production Planning, 1965.
Supplemental data on adjustment of Flint formula calculations to include injected auxiliary fuels, private communication from United States Steel Corporation, 1966.
Kelley, K.K.; High-Temperature Heat Content, Heat-Capacity, and Entropy Data for the Elements and Inorganic Compounds, U.S. Bureau of Mines Bulletin 584, 1960.
Elliott, J.F., and Gleiser, M.; Thermochemistry for Steelmaking, Volume I, Addison-Wesley, Reading, Massachusetts, 1960.
Weast, R.C., ed.; Chemical Rubber Handbook, 51st Edition, 1970–’71, p. F-147, Chemical Rubber Co., Cleveland, 1970.
Author information
Authors and Affiliations
Additional information
T. M. Barnes Thomas M. Barnes is chief of the primary operations division at Battelle Memorial Institute’s Columbus Laboratories. He joined the Battelle staff in 1960. After two years he left to become a research supervisor for Interlake Iron, rejoining the Battelle staff in 1967. He was made associate division chief in 1970, and chief in 1971. In recent years, he has performed and supervised projects in raw materials selection and utilization, and computer simulation and analysis of primary processes, among others. Barnes is the 1972 recipient of the J. E. Johnson, Jr. Award of The Metallurgical Society of AIME. (See page 58.)
Harold W. Lownie, Jr. is senior research advisor, process and physical metallurgy section, Department of Physics and Metallurgy at Battelle Memorial Institute’s Columbus Labs. He joined the Battelle staff in 1945 after serving for six years as a materials engineer and laboratory supervisor for Westinghouse Electric Corp. His field of specialization is ferrous process metallurgy, with emphasis on the reduction of iron ore, steelmaking, and foundry practice.
Rights and permissions
About this article
Cite this article
Barnes, T.M., Lownie, H.W. Ironmaking studies via computer. JOM 24, 46–50 (1972). https://doi.org/10.1007/BF03355762
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03355762