Abstract
This article presents the results of research on the elasticity and durability of chemically bonded molding sands, most notably those containing hydrophilic binders. This research concerns the top surface layer of a sand mold. The observed loss of durability in the top surface layer can be caused by excessive dehydration of the binder. The pace and range of the changes depends on the air temperature and moisture, grain size, and amount of binder. The developed ultrasound method allows for observation of the kinetics of these changes with the results having practical applications.
Similar content being viewed by others
References
Pavlovsky, J., Thomas, B., Brendler, E., Polzin, H., Tilch, W., Skuta, R., Jelinek, P., “Wasserglasgebundene Formstoffe,” Giesserei Praxis, vol. 56, No 1, pp. 82–88 (2005).
Zych, J., Patent PL. No -192202 B1; (Aug: 29.07.1999).
Zych, J., “Molding Sands Surface Layer-Kinetics of the Changes Its Property,” Archives of Foundry, vol. 6, no 20, pp. 77–84 (2006).
Zych, J., “Effecting of the Weather Conditions on the Surface Layer Condition of Molds Made with Molding Sand with the Chemical Bonding,” Archives of Foundry, vol. 6, No 22, pp. 576–581 (2006).
Zych, J., “Complex Evaluation of the Quality of the Molding Sand Bonded With the Chemical Binder Based on a New Investigation Method,” Przegl d Odlewnictwa, vol. 56, No 7–8, pp. 330–337 (2006).
Zych, J., “Das Verhalten Chemisch Gebundener Formstoffe unter Wechselnden Umgebungsbedingungen,” Giesserei Praxis, vol. 58, No. 1–2, pp. 22–28 (2007).
Zych J., “Behavior of Molding Sand with Hydrophilic Binders in Dry Air,” Przegl d Odlewnictwa, vol. 57, No 9, pp. 476–482 (2007).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Zych, J. Behavior of Chemically Bonded Molding Sands in Dry Air. Inter Metalcast 3, 17–27 (2009). https://doi.org/10.1007/BF03355445
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03355445