Abstract
Low pressure is perhaps the longest-running pressure assisted process for manufacturing high integrity structural aluminum castings and recent variations on that process have enhanced its capability. Still, high pressure die casting has long dominated the manufacture of aluminum castings and variants like high-vacuum, squeeze and semi-solid now make die casting quite suitable for even the most demanding high integrity applications.
This paper provides a review of prominent pressure assisted casting processes, and discusses underlying principles and fundamentals. Representative examples of products successfully made by each process are provided.
Similar content being viewed by others
References
Aluminum Association website statistics, 2004, www.autoaluminum.org/apps.
Apelian, D and Makhlouf, M., High Integrity Aluminum Die Casting: Alloys, Processes & Melt Preparation, North American Die Casting Association (NADCA), Rosemont, IL (2004).
Z. Brown, B. Szymanowski, M. Musser, D. Saha, S. Seaver and M. Hartlieb, “Manufacturing of Thin Walled Structural Automotive Components Through High Vacuum Die Casting Technology”, Transactions, North American Die Casting Association (NADCA), Houston, TX, May 2007, paper # T07-022.
D. Doutre, J. Langlais, and S. Roy, “The SEED Process for Semi-Solid Forming”, in 8th International Conference on Semi-Solid Processing of Alloys and Composites, 2004, Limassol, Cyprus.
Z. Fan, S. Ji, G. Liu, and E. Zhang, “Development of the Rheo-Diecasting Process for Mg-Alloys and Their Components”, in 8th International Conference on Semi-Solid Processing of Alloys and Composites, 2004, Limassol, Cyprus.
Fields, J. R., US Patent No. 5,370,171 (December 06, 1994).
M. Findon, “Semi-Solid Slurry Formation via Liquid Metal Mixing”, M.Sc, Thesis, Worcester Polytechnic Institute, 2003.
de Figueredo, A., Science and Technology of Semi-Solid Metal Processing, North American Die Casting Association (NADCA), Rosemont, IL (2001).
International Magnesium Association private communication, July, 2005.
Hielscher, U. et al, “Magsimal-59, An AlMgMnSi-Type Squeeze-Casting Alloy Designed for F-Temper” TMS Tansactions Light Metals, pp 933–937, (1996).
Jorstad, J. L., “History of the Low Pressure Process,” SDCE (now NADCA) Transactions, Low Pressure Die Casting Seminar, Troy, MI, (1979).
Jorstad, J., Thieman, M., Kamm, R., “Fundamental Requirements for Slurry Generation in the Sub Liquidus Casting Process & The Economics of SLC™ Processing”, Paper # 07-01, NADCA-published Transactions, The 8thS2P International Conference on Semi-solid Processing of Alloys and Composites — Limassol, Cyprus, (2004)
Jorstad, J, Pan, Q.Y. & Apelian, D. “A Rheocasting Route: SLC™ + CRP™, A Marriage of Unique Processes”, North American Die Casting Association (NADCA), Columbus, OH, April 2006, paper # T06-0xx.
Kopper, A., Donahue, R, Olsen, D. and Midson, S., “Semi-Solid Casting Process Shows Muscle for Mercury Marine”, Modern Casting, vol. 94, No. 5, pp35–37, (2005).
Koch, H. et al, “Silafont-36, The Low-Iron High-Pressure Die Casting Alloy”, TMS Transactions Light Metals, pp 1011–1018, (1995).
Martines, R. A., de Figueredo, A. M., Yurko, J. A. and Flemings, M. C., NADCA Transactions, paper #T01-023 (2001).
Product Specification Standards for Die Castings Produced by the Semi-Solid and Squeeze Casting Processes, 3rdEdition, North American Die Casting Association (NADCA), Rosemont, IL, (2000).
Q.Y. Pan, M. Findon, and D. Apelian, “The Continuous Rheoconversion Process (CRP): A Novel SSM Approach”, in 8th International Conference on Semi-Solid Processing of Alloys and Composites, 2004, Limassol, Cyprus.
Ruff, G., Prucha, T., Barry, D., Patterson, J., “Pressure Counter Pressure Casting for Automotive Aluminum Structural Components”, SAE Congress Paper # 2001-01-0411, Society of Automotive Engineers, Warrendale, PA, (2001).
Spada, A. T., “Hayes Lemmerz Montague Delivers a Permanent Solution”, Modern Casting, Vol. 94 No 2 (2005).
Ube Industries Ltd., Japan: European Patent No. EP0 745 694 A1 (December 04, 1996).
Winkler, R. “Aural-2: A Die Casting Alloy for Crashworthy Structural Components and Suspension Parts”, ALCAN AURAL 2 (AlSi10MKgMnFe) brochure
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Jorstad, J., Apelian, D. Pressure Assisted Processes for High Integrity Aluminum Castings. Inter Metalcast 2, 19–39 (2008). https://doi.org/10.1007/BF03355420
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03355420