Abstract
In this paper, a detailed evaluation is presented on the IIW joint working group on residual stress and distortion prediction X/XV JWG RSDP phase 1 numerical results on pipe girth welds. A series of finite element analyses were performed to illustrate how the large discrepancies seen in the residual stress predictions resulted from the round-robin phase I. This includes both problem definitions and implementation of numerical procedures, as well as proper interpretation of predicted residual stress results. Finally, lessons learned from RSDP phase I round-robin results and recommendations for performing residual stress estimate are summarised.
Similar content being viewed by others
References
Gordon, R., IIW X/XV JWG RSDP round-robin Phase 1: Revised Protocol, November, 1999.
P. Janosch, J.-J., Residual Stress Compendium Compilation: Draft ProtocolCall for Participation”, IIW Doc. IIW-X-XIII-XV-RSDP-43-02, January, 2002.
Gordon, R. and Koppenhoefer, K., “Progress Update on IIW round-robin on Residual Stress and Distortion Prediction”, IIW Doc. IIW-X/XV-RSDP-49–99.6.
Dong, P. and Hong, J.K., “Battelle’s Results and Comments on IIW X-XV RSDP round-robin Problem Definition and Results”, Presented at IIW X/XV Intermediate Meeting, Miami, Fl., January 27, 2000.
Koppenhoefer, K. and Gordon, R., “IIW X-XV RSDP Residual Stress round-robin Results — Phase 1”, Presentation at IIW 2000 Annual Assembly, Florence, Italy, IIW-X-XV-RSDP-50–2000.
Dong, P., “Modeling of Weld Residual Stresses and Distortions: Advanced Computational Procedures and Practical Applications”, Keynote Lecture — Proceedings of The Sixth International Conference on Residual Stresses (ICRS-6), Oxford, United Kingdom, July 10–12, 2000, pp. 1223–1335.
Dong, P. and Brust, F.W, “Welding Residual Stresses and Effects on Fracture in Pressure Vessel and Piping Components: A Millennium Review and Beyond”, The Millennium Issue, ASME Transactions: Journal of Pressure Vessel Technology, Vol. 122, No. 3, August 2000, pp. 329–328.
Dong, P., Cao, Z., Hong, J.K., Brust, F.W., Bell, W., and McDonald, E.J., “Recent Progress in Analysis of Welding Residual Stresses”, Welding Research Council, WRC Bulletin 455, September, 2000, Welding Research Council, Inc., New York.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Dong, P., Hong, J.K. Analysis of IIW X/XV RSDP Phase I Round-Robin Residual Stress Results. Weld World 46, 24–31 (2002). https://doi.org/10.1007/BF03263380
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03263380