Abstract
This study determined the changes in core loss of a typical nonoriented silicon steel as a function of carbon saturation and aging temperature and time. The kinetics of carbide precipitation were investigated over the temperature range from 150 to 760°C and times from 30 sec. to 240 hrs. The changes in core loss were evaluated and correlated with morphology and distribution of carbide precipitates, using optical and electron microscopy. Once a transition carbide dispersion was initially established at a given aging temperature, particle coarsening and core loss changes were generally insensitive to aging time.
Similar content being viewed by others
References
D. Kuppers, S. Kranz and A. Hubert, “Coercivity and Domain Structure of Silicon-Iron Single Crystals,” J. Appl. Phys., Vol. 30, (1968) pp. 608–613.
A.T. Englisn, “Experimental Test of Keels Theory of Coercive Force Due to Inclusions,” J. Appl. Phys., Vol. 40, (1969), pp. 1573–1574.
P.J. Adzema and D.J. Knight, “Columnar Grain Growth in Low Carbon Steel,” Trans. ASM, Vol. 56, (1963) pp. 576–582.
D.A. Leak and G.M. Leak, “The Influence of Impurities on the Magnetic Properties of High-purity 3% Silicon Iron,” J. Iron and Steel Inst., Vol. 187, (1957) pp. 190–194.
D.J. Knight and P.J. Adzema, “Some Processing Factors Affecting the Magnetic Properties of Low-Carbon Steel,” Trans. ASM, Vol. 54, (1961) pp. 355–361.
W.C. Leslie and D.W. Stevens, “The Magnetic Aging of Low-Carbon Steels and Silicon Irons,” Trans. ASM, Vol. 57, (1964) pp. 261–283.
W.C. Leslie, The Physical Metallurgy of Steels, McGraw-Hill, New York, NY, (1981), pp. 104–106.
J.A. Slane and P.A. Labun, “The Relationship of Magnetic Properties to Carbide Distribution in a Continuous Annealed 2.5% Silicon Electrical Steel Before and After Aging,” Energy Efficient Electrical Steels, TMS-AIME, Warrendale, PA, (1981), pp. 169–182.
W.C. Leslie, “The Quench-Aging of Low-Carbon Iron and Iron-Manganese Alloys,” Acta Meta., Vol. 9, (1961) pp. 1004–1022.
K.F. Hale and D. McLean, “Structure of Quench-Aged Iron-Carbon and Iron-Nitrogen Alloys,” J. Iron and Steel Inst., Vol. 201, (1963) pp. 337–352.
M.G.H. Wells and J.F. Butler, “The Two-Stage Precipitation of Carbon from Ferrite,” Trans ASM, Vol. 59, (1966) pp. 427–438.
J.F. Butler, “Kinetics of the Two-stage Precipitation of Carbon from Ferrite,” J. Iron and Steel Inst., Vol. 204, (1966) pp. 127–132.
E.W. Langer, “An Investigation of Carbide Precipitation in Iron,” Metals Sci. J., Vol. 2, (1968) pp. 59–66.
R.F. Vyhnal and S.V. Radcliffe, “The Effect of Quench Rate on the Aging of Alpha Iron,” Acta Met, Vol. 20, (1972) pp. 435–445.
G. Delisle and A. Galibois, “Carbide Precipitation in Tempered Extra-Low Carbon Steels,” Scripta Met., Vol. 5, (1971) pp. 309–314.
J.F. Enrietto, M.G.H. Wells and E.R. Morgan, “Quench Aging in Fe-Mn-C-N Alloys,” Precipitation from Iron Base Alloys, Gordon and Breach, New York, NY, (1965) pp. 141–171.
S.K. Ray, S. Mishra and O.N. Mohanty, “Magnetic Aging Characteristics of a Phosphorous-Bearing Low Carbon Steel,” Scripta Met., Vol. 15, (1981) pp. 971–972.
S.K. Ray, S. Mishra and O.N. Mohanty, “TEM Study of Carbide Precipitation in a Phosphorous-Bearing Low-Carbon Steel,” Scripta Met., Vol. 16, (1982) pp. 43–45.
W.C. Leslie and G.C. Rauch, “Precipitation of Carbides in Low-Carbon Fe-Al-C Alloys,” Met. Trans. A, Vol. 9A, (1978) pp. 343–349.
W.C. Leslie, R.M. Fisher and N. Sen, “Morphology and Crystal Structure of Carbides Precipitated from Solid Solution in Alpha Iron,” Acta Met., Vol. 7, (1959) pp. 632–644.
W.C. Leslie, R.L. Rickett, C.P. Stroble and G. Konoval, “The Microstructure of Low-Carbon 3.25% Silicon Steel,” Trans. AMS, Vol. 53, (1960) pp. 715–734.
A.S. Ken and W.C. Leslie, “Recent Observations on Quench-Aging and Strain-Aging of Iron and Steel,” Material Science Research Vol. I, Plenum Publishing, New York, NY, (1963) pp. 208–250.
G.M. Michal and J.A. Slane, “The Kinetics of Carbide Precipitation in Silicon-Aluminum Steels,” to be published in Met. Trans. A, (1986).
T. Obara, K. Sakata and T. Irie, “Effect of Cooling Rate in Continuous Annealing on the Tensile Properties of Al-killed Steel Sheet,” Metallurgy of Continuous-Annealed Sheet Steel, TMS-AIME, Warrendale, PA, (1982) pp. 83–98.
L.J. Dijkstra, “Non-Ferromagnetic Precipitate in a Ferromagnetic Matrix,” Magnetism and Metallurgy Vol. 2, Academic Press, New York, NY, (1969) pp. 513–522.
M. Nacken and J. Rahmann, “Die Anderung der Koerzitivkraft bei der Alterung weicher unlegierter Stable,” Arch. Eisenhuetteneuer, Vol. 31, (1960) pp. 153–160.
W.S. Owen, “The Effect of Silicon on the Kinetics of Tempering,” Trans. ASM, Vol. 46, (1954) pp. 812–828.
Additional information
Gary M. Michal received his Ph.D. in materials science and engineering from Stanford. He is currently Assistant Professor in the Department of Metallurgy and Materials Science at Case Western Reserve University. He is also a member of TMS.
John A. Slane received his M.S. in metallurgy and materials science from Case Western Reserve University. He is currently Supervisor of Advanced Microstructural Analysis at LTV Steel Research Center.
Rights and permissions
About this article
Cite this article
Michal, G.M., Slane, J.A. Carbide Precipitation in Electrical Steels. JOM 38, 32–36 (1986). https://doi.org/10.1007/BF03257952
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03257952