Abstract
This report represents the successful culmination of many years of developmental work with blended elemental (BE) P/M titanium alloys. Although the appreciable cost savings possible through utilization of cold isostatically pressed near-net shape titanium components has been recognized for several years, applications have been somewhat limited by the less than optimal fatigue performance of these P/M alloys. The recent completion of fatigue testing on reduced chloride P/M Ti-6Al-4V alloys has demonstrated the achievement of wrought equivalent fatigue properties. This data supplements the wrought equivalent tensile properties previously achieved. By virtue of these advances, cost effective blended elemental titanium components can now satisfy the most demanding requirements in industrial and aerospace applications.
Similar content being viewed by others
References
S. Abkowitz, “Cost Savings in the Application of P/M Titanium and P/M Aluminum Alloys,” MPIF, National Powder Metallurgy Conference Proceedings, (1974), pp. 85–101.
S. Abkowitz, “Isostatic Pressing of Complex Shapes from Titanium and Other Materials,” paper presented at 10th National SAMPE Technical Conference, Kiamesha Lake, N.Y., 1978.
S. Abkowitz, “Isostatic Pressing of Complex Shapes from Titanium and Titanium Alloys,” Powder Metallurgy of Titanium Alloys Conference Proceedings, Las Vegas, NV, (1980), pp. 291–302.
S. Abkowitz, “Isostatic Pressing of Complex Shapes from Titanium and Titanium Alloys,” Ti-80—4th International Conference on Titanium, Kyoto, Japan, (1981), pp. 2321–2330.
F.H. Froes, et al., “Powder Metallurgy of Light Metal Alloys for Demanding Applications,” Journal of Metals, 36 (1) (1984), pp. 14–27.
S. Abkowitz, “Production of Complex Full Density P/M Titanium Shapes by the CHIP Process,” APMI National Powder Metallurgy Conference, Philadelphia, PA, 1981.
S. Abkowitz, et al., “Titanium Alloy Shapes from Elemental Blend Powder and Tensile & Fatigue Properties of Low Chloride Compositions,” Titanium Net Shape Technologies, ed. by F.H. Froes and D. Eylon, TMS-AIME Publication, Warrendale, PA, 1984, pp. 107–120.
D. Eylon, et al., “Fatigue Improvement of Prealloyed and Blended Elemental Titanium Powder Metallurgy Compacts by Microstructure Modification,” Modern Developments in Powder Metallurgy, Vols. 15–17, 1985, pp. 563–575.
G.R. Yoder, L.A. Cooley and T.W. Crooker, “A Comparison of Microstructural Effects on Fatigue-Crack Initiation and Propagation in Ti-6A1-4V,” Proceedings of the AIAA 23rd Structures, Structural Dynamics and Materials Conference, 1982, New Orleans, LA, pp. 132–136.
M. Peters, A. Gysler and G. Luetjering, “Influence of Microstructure on the Fatigue Behavior of Ti-6Al-4V,” Titanium 80, ed. by H. Kimura and O. Izumi, TMS-AIME Publications, Warrendale, PA, 1980, pp. 1777–1786.
D. Eylon, R.G. Vogt and F.H. Froes, “Property improvement of Low Chloride Ti Alloy Blended Elemental Powder Compact by Microstructure Modification,” presented at the MPIF Annual Powder Metallurgy Conference and Exhibition (“P/M in a New Light”), Boston, MA (1986). Proceedings to be published as Progress in Powder Metallurgy, Vol. 42.
Additional information
Stanley Abkowitz received his degree in chemical engineering from M.I.T. in 1948. He is founder and president of Dynamet Technology Inc. of Burlington, Massachusetts. Mr. Abkowitz is also a member of TMS.
David M. Rowell has studied material science at Worcester Polytechnic Institute. He is currently project engineer for Dynamet Technology Inc. of Burlington, Massachusetts.
Rights and permissions
About this article
Cite this article
Abkowitz, S., Rowell, D. Superior Fatigue Properties for Blended Elemental P/M Ti-6Al-4V. JOM 38, 36–39 (1986). https://doi.org/10.1007/BF03257786
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03257786