Abstract
NXP presents in this article a design of a Flexray switch, which enables to increase the available bandwidth in a Flexray cluster by exploiting possible branch parallelism. The design has been implemented in an FPGA prototype and is supported by a coherent programming flow. The capabilities of the Flexray switch are demonstrated in case study showing a bandwidth increase of 210 %.
Similar content being viewed by others
References
Flexray consortium: Protocol specification Version 3.0
Flexray consortium: Electrical Physical Layer specification Version 3.0
Wille, M. et al.: Synchronized and Efficient Bandwidth Allocation using Multidimensional Scheduling. Flexray Product Day 2009
Milbredt, P. et al.: Switched Flexray: Increasing the Effective Bandwidth and Safety of Flexray Networks. In: Proceedings of the IEEE International Conference on Emerging Technologies and Factory Automation, 2010
Elektronik automotive, Sonderheft Audi A8, Februar 2010
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Vermeulen, B., Staschulat, J., Struck, M. et al. Flexray switch. ATZ Elektron Worldw 5, 32–36 (2010). https://doi.org/10.1007/BF03242297
Issue Date:
DOI: https://doi.org/10.1007/BF03242297