Advertisement

MTZ worldwide

, Volume 67, Issue 1, pp 21–23 | Cite as

CAE-based port development for modern SI engines

  • Philipp Adomeit
  • Oliver Lang
  • Anton Schmidt
  • Martin Hopp
Research Combustion
  • 35 Downloads

Abstract

Today’s engine and combustion process development is closely related to the port layout. Traditionally, an experimental investigation carried out on flow test benches defines the port layout, nowadays CAE methods offer further potentials of optimization. In this paper by FEV Motorentechnik GmbH, Aachen, Germany, an integrated approach is presented, which combines the pre-optimization of port design with a CAD-CFD methodology and with a detailed optimization by experimental flow test investigations.

Keywords

Valve Lift Intake Port Port Design Valve Guide Port Angle 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

CAE-gestützte Kanalentwicklung für moderne Ottomotoren

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    Endres, H.; Neußer, H.-J.; Wurms, R.: Influence of swirl and tumble on economy and emissions of multi-valve SI engines, SAE Paper 920516Google Scholar
  2. [2]
    ES-ICE Version 1.02 user manuals, CD Adapco, 2003Google Scholar
  3. [3]
    Star-CD Version 3.15 methodology, CD Adapco, 2001Google Scholar
  4. [4]
    Haworth, D.C.; Jansen, K.: Large-eddy simulation on unstructured deforming meshes: towards reciprocating IC engines. In: Computers & Fluids 29 (5), 2000, S. 493–524Google Scholar
  5. [5]
    Breuer, M.; Adomeit, Ph.; Geiger, J.; Lang, O.; Wolters, P.: Tumble combustion system for direct injection gasoline engines, Proc. JSAE Annual Congress, No 40-01, JSAE Paper 20015360, 2000Google Scholar
  6. [6]
    Mode-Frontier Version 3.0 manuals, ESTECO, 2003Google Scholar
  7. [7]
    Grebe, U.; Friedrich, C.; Krausgrill, C.: Möglichkeiten zur Erzeugung von Ladungsbewegung und deren Einfluss auf die Prozessgrößen des Ottomotors. 6.Tagung “Der Arbeitsprozess des Verbrennungsmotors” Graz, 1997Google Scholar
  8. [8]
    Chung-Hwan Jeon, Young-June Chang, Kyu-Bak Cho, Kern-Yong Kang: Effects of intake ports on in-cylinder flow and lean combustion in a 4-Valve Engine. SAE Paper 981048Google Scholar

Copyright information

© Springer Fachmedien Wiesbaden 2006

Authors and Affiliations

  • Philipp Adomeit
  • Oliver Lang
  • Anton Schmidt
  • Martin Hopp

There are no affiliations available

Personalised recommendations