Verbinden von Polymer-Metall-Strukturen mittels Reibnieten

Fügetechnik

Joining polymer-metal structures using friction riveting

Joining Technology

Zusammenfassung

Vor allem in der Transportindustrie werden, um Gewicht zu reduzieren, immer häufiger Polymer-Metall-Werkstoffverbunde eingesetzt. Dieser Trend wird durch gestiegene Anforderungen an Material und Umweltverträglichkeit sowie die Notwendigkeit, Kosten einzusparen, begünstigt. Beim so genannten FricRiveting, einem für diese Anwendung entwickelten Reibnietverfahren, handelt es sich um eine Punktverbindungstechnik, die besonders für die Herstellung von Hybridstrukturen aus Thermoplasten und Leichtbau-Legierungen geeignet ist.

Abstract

Polymer-metal composites are being increasingly used to reduce weight, especially in the transport industry. This trend is being supported by higher requirements regarding materials and environmental compatibility as well as the necessity to reduce costs. So-called FricRiveting, a friction riveting process specially developed for this application, is a spot joining process that is particularly well-suited for producing hybrid structures consisting of thermoplastics and lightweight alloys.

This is a preview of subscription content, access via your institution.

Literatur

  1. [1]

    R. W. Messler Jr., Assem. Autom., 2000, 20, 118–128.

    Google Scholar 

  2. [2]

    R. O. Parmley, Standard Handbook of Fastening and Joining, 3rd ed., McGraw-Hill, New York, 1996.

    Google Scholar 

  3. [3]

    L. -H. Lee, Fundamentals of Adhesion, Plenum Press, New York, 1991.

    Google Scholar 

  4. [4]

    Amancio-Filho, S. T., Beyer, M., dos Santos J. F., DE 10 2005 056 606 A1, 2005.

  5. [5]

    J. R. Davis, ASM Specialty Handbook, Aluminum and aluminum alloys, 3rd ed., ASM International, 1996.

    Google Scholar 

  6. [6]

    G. Gardiner, High Perform. Composit. 2006, March, 50–55.

    Google Scholar 

  7. [7]

    A. Gavine, Aerosp. Test. Int.2005, March, 39–43.

    Google Scholar 

  8. [8]

    S. T. Amancio-Filho, J. F. dos Santos, in Proceedings ANTEC 2008 Annual Conference of the Society of Plastic Engineers, Milwaukee, USA, Oktober 4–8, 2008, pp. 841–845.

    Google Scholar 

  9. [9]

    S. T. Amancio-Filho, Ph.D. Thesis, TU Hamburg-Harburg, Germany, 2007.

    Google Scholar 

  10. [10]

    S. T. Amancio-Filho, F. Beckmann, J. F. dos Santos, in Proceedings TMS 2009 Annual Meeting & Exhibition February 15–19, 2009, San Francisco, California, USA.

    Google Scholar 

  11. [11]

    VDI 2230 Part 1, “Systematic calculation of high duty bolted joints — joints with one cylindrical bolt”, (Germany, Verein Deutscher Ingenieure (VDI), 2003).

  12. [12]

    ASTM D 5961/D 5961 M-05 Standard test method for bearing response of polymer matrix composite laminates, ASTM International, USA, 2005.

  13. [13]

    S. T. Amancio-Filho, J. F. dos Santos, in Proceedings MS&T 08, Pittsburgh, USA, Oktober 4–10, 2008, pp. 2362–2373.

  14. [14]

    S. T. Amancio-Filho, J. Roeder, S. P. Nunes, J. F. dos Santos, F. Beckmann, Polym. Degrad. Stabil. 2008, 93, 1529–1538.

    CAS  Google Scholar 

Download references

Author information

Affiliations

Authors

Corresponding author

Correspondence to Dr.- Ing. Sergio Amancio.

About this article

Cite this article

Amancio, S. Verbinden von Polymer-Metall-Strukturen mittels Reibnieten. Lightweight Des 2, 46–50 (2009). https://doi.org/10.1007/BF03223569

Download citation