References
Physical Metallurgy Principles. By Robert E. Reed-Hill and Reza Abbaschian. ISBN 0-534-98236-0. PWS-Kent Publishing Company. 1992. Hardcover. 926 pages. List: $73.95.
References
Bainite in Steels. By H.K.D.H. Bhadeshia. ISBN 0-901462-95-0. Cambridge University Press. 1992. Hardcover. 451 pages. List: $110.
References
J.M. Robertson, J. Iron Steel Inst., 119 (1929), p. 391.
E.S. Davenport and E.C. Bain, Trans. AIME, 90 (1930), p. 117.
K.A. Kinsman, E. Eichen, and H.I. Aaronson, Metall. Trans. A, 6A (1975), p. 303.
J.M. Rigsbee and H.I. Aaronson, Acta Metall., 27 (1979), p. 365.
J.S. Bowles and N.F. Kennon, J. Austral. Inst. Metals, 5 (1960), p. 106.
G.A. Srinivasan and C.M. Wayman, Acta Metall., 16 (1968), p. 621.
C.M. Wayman, Metallography, 8 (1975), p. 105.
S. Hoekstra, Acta Metall., 23 (1980), p. 507.
B.P.J. Sandvik, Metall. Trans. A, 13A (1982), p. 777.
W.T. Reynolds, Jr., et al., Metall. Trans. A, 21A, (1990), p. 1479.
P.T. Boswell etal., Mechanical Properties and Phase Transformation in Engineering Materials (Warrendale, PA: TMS, 1986), p. 445.
H. Tsubakino and H.I. Aaronson, Metall. Trans. A, 18A (1987), p. 2047.
G.J. Shiflet and H.I. Aaronson, Metall. Trans. A, 21A (1990), p. 1413.
W.T. Reynolds, Jr., etal., Metall. Trans. A, 21A (1990), p. 1433.
W.T. Reynolds, Jr., S.S. Brenner, and H.I. Aaronson, Scripta Metall., 22 (1988), p. 1343.
Author information
Authors and Affiliations
Additional information
An erratum to this article is available at http://dx.doi.org/10.1007/BF03222499.
Rights and permissions
About this article
Cite this article
Loria, E.A., Aaronson, H.I. Book review. JOM 45, 71 (1993). https://doi.org/10.1007/BF03222388
Issue Date:
DOI: https://doi.org/10.1007/BF03222388