Abstract
Alumina-containing titanium-carbonitride nickel composites (Al2O3-TiCN-Ni-Mo2C) have been synthesized with up to 20 vol.% alumina particles and nickel contents of 10–15 vol.%. Alumina in the form of platelets as well as powders have been successfully incorporated into the composites. The mechanical properties of these composites show a marked increase in toughness while retaining a good hardness and a low density when compared to TiCN-Ni cemented carbides. The presence of alumina with its superior chemical and wear resistance makes these composites very attractive for all wear parts—particularly for pieces exposed to chemically aggressive environments and high-temperature applications. Moreover, the complementary properties of these new composites (e.g., light weight, hardness, toughness, and chemical stability) allow a wide range of applications to be envisaged.
Similar content being viewed by others
References
J.G. Baldoni and S.T. Buljan, “Ceramics for Machining,” J. Am. Ceram. Soc. Bull., 67 (2) (1988), pp. 381–387.
H. Doi, “Advanced TiC-TiN Based Cermets,” Science of Hard Materials, Int. Phys. Conf. Ser. No. 75 (Bristol, England: Adam Hilger, 1986), pp. 489–523.
E.B. Clark and B. Roebuck, “Extending the Application Areas for Titanium Carbonitride Cermets,” Refractory Metals & Hard Materials, 11 (1992), pp. 23–33.
S. Nourbakhsh, F.L. Liang, and H. Margolin, “Fabrication of Ni3Al-Al2O2 Uni-directional Composite by Pressure Casting,” Adv. Mater. and Manufacturing Processes, 3 (1988), pp. 57–78.
M. Nicholas, “The Strength of Metal/ Alumina Interfaces,” J. Mater. Sci., 3 (1968), pp. 571–576.
E.D. Hondros, “Bonding of Metal/Ceramic Interfaces,” Science of Hard Materials, Inst. Phys. Conf. Ser. No. 75 (Bristol, England: Adam Hilger, 1986), pp. 121–136.
K.C. Russel, S.-Y. Oh, and A. Figuerdo, “Theoretical and Experimental Studies of Ceramic: Metal Wetting,” J. Mater. Sci. Bull. (April 1991), pp. 46–52.
W.H. Tuan and R.J. Brook, “Processing of Alumina/Nickel Composites,” J. Eur. Ceram. Soc., 10 (1992), pp. 95–100.
W.H. Tuan and M.C. Lin, “Preparation of Alumina/Nickel Composites by a Gas Reduction Process,” Third Euro-Ceramics, vol. 3, ed. P. Durán and J.F. Fernández (Castellon de la Plana, Spain: Faenza Editrice Ibérica S.L., 1993), pp. 707–712.
B.M. Kramer et al., “Aluminium Oxide-Metal Compositions,” U.S. patent 4,792,353 (1988).
Shujie Li, “Investigation of the Powder Metallurgical Route for Manufacturing Al2O3/Ni Cermets with Interlayers,” Ph.D. thesis, University of Twente, Enschede, the Netherlands (1992).
M.D. Sacks, H.-W. Lee, and O.E. Rojas, “Suspension Processing of Al2O3/SiC Whisker Composites,” J. Am. Ceram. Soc., 71 (5) (1988), pp. 370–379.
L.A. Aksay, F.F. Lange, and B.I. Davis, “Uniformity of Al2O3-ZrO2 Composites by Colloidal Filtration,” J. Am. Ceram. Soc., 66 (10) (1983), pp. C19O–C192.
D.A. Warner and O.T. Sorensen, “Ceramic Platelet Composites Produced by Pressure Filtration,” Second Euro-Ceramics, vol. 2, ed. G. Ziegler and H. Hausner (Castellon de la Plana, Spain: Deutsche Keramische Gesellschaft e.V., 1993), pp. 1547–1551.
P. Bowen et al., “Slip Casting of TiCxN1-x-Mo2C-Ni Cermets,” Third Euro-Ceramics, vol. 1, ed. P. Durán and J.F. Fernández (Køln, Germany: Faenza Editrice Ibérica S.L. 1993), pp. 549–554.
P. Bowen, R. Mulone, and P. Streit, “Processing of Ceramic-Metal Composites (Cermets) Al2O3-TiCxNt-x-Mo2C-Ni,” Ceramic Transactions, vol. 51, ed. H. Hausner, G.L. Messing, and S. Hirano (Westerville, OH: American Ceramic Society, 1995), pp. 621–625.
K. Niihara, R. Morena, and P.H. Hasseiman, J. Mater. Sci. Lett., 1 (1982), pp. 13–16.
R. Warren and B. Johanneson, “The Fracture Toughness of Hardmetals,” Sintered Metal Ceramic Composites, ed. G.S. Updayaya (Amsterdam, Netherlands: Elsevier Science Publishers, 1984), pp. 365–375.
A.G. Evans and T.R. Wilshaw, “Quasi-Static Solid Particle Damage in Brittle Solids I—Observations, Analysis and Implications,” Acta Metall., 24 (1976), pp. 939–956.
T.W. Clyne and P.J. Withers, An Introduction to Metal Matrix Composites (Cambridge, U.K: Cambridge University Press, 1993), pp. 242–251.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bowen, P., Bonjour, C., Carry, C. et al. Novel alumina titanium-carbonitride nickel composites. JOM 47, 56–58 (1995). https://doi.org/10.1007/BF03221312
Issue Date:
DOI: https://doi.org/10.1007/BF03221312