Advertisement

Gold Bulletin

, Volume 7, Issue 2, pp 42–49 | Cite as

Properties of gold-nickel alloy brazed joints in high temperature materials

  • Jakob Colbus
  • Karl Friedrich Zimmermann
Open Access
Article

Abstract

The usefulness of gold-nickel alloys as brazing media in the aeroengine, electronic, nuclear power and spacecraft industries is illustrated by data on the corrosion and oxidation resistance of joints made with these alloys in various heat-resistant materials and on their resistance to fracture under the influence of static, dynamic and impact loads in tests at subzero, normal and elevated temperatures.

Keywords

Fatigue Strength Parent Material Test Piece Diffusion Zone Parent Metal 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    W. Hauch, Dissertation, Hanover, 1968Google Scholar
  2. 2.
    J. Colbus and A. Keller, Doctoral Thesis, Saarbrücken, 1968Google Scholar
  3. 3.
    J. Colbus and W. Hauch, “The Creep Behaviour of Joints made with High-Resistant Materials and Tested for Periods of up to 1000 hours at Temperatures of up to 800°C,” Metall, 1969, 23, (10), 994–1002Google Scholar
  4. 4.
    H. Lange, “Mechanical Properties of Vacuum-Brazed Heat-Resistant Materials,” Schweissen and Schneiden, 1971, 23, (1), 3–6Google Scholar
  5. 5.
    M. H. Sloboda, “Industrial Gold Brazing Alloys,” Gold Bulletin, 1971, 4, (1), 2–8Google Scholar
  6. 6.
    J. Colbus, “Creep Strength and Oxidation Resistance of Joints Brazed in Heat-Resistant Materials Tested for up to 1000 hours at Temperatures between 300 and 700°C,” Metall, 1971, 25, (10), 1103–1109Google Scholar
  7. 7.
    H. Lange, “The Use of High-Temperature Vacuum Brazing for Making Leak-Proof Joints in Heat-Resistant Materials,” Metall, 1972, 26, (8), 814–820Google Scholar
  8. 8.
    J. Colbus and K. F. Zimmermann, “High-Temperature Properties of Brazing Alloys and Brazed Joints,” Verbindungstechnik, 1973, (1)Google Scholar
  9. 9.
    H. D. Steffens and H. Lange, “Fatigue Strength of Joints Brazed with High-Temperature Materials,” Werkstofftechnik, 1972, 3, 296–301CrossRefGoogle Scholar
  10. 10.
    J. Colbus, Unpublished test resultsGoogle Scholar
  11. 11.
    W. H. Chang, “Basic Characteristics of Some Heat-Resisting Brazing Filler Materials,” Welding J., 1956, 35, (9) 431s-443s; “Further Evaluation of Ni-Cr-B and Au-18Ni Brazing Alloys,” Ibid., 1958, 37, (12), 535s–542sGoogle Scholar
  12. 12.
    J. Colbus and P. Thiel, Thesis, Saarbrücken, 1969Google Scholar

Copyright information

© World Gold Council 1974

Authors and Affiliations

  • Jakob Colbus
    • 1
  • Karl Friedrich Zimmermann
    • 2
  1. 1.University of SaarlandSaarbrückenWest Germany
  2. 2.DegussaWest Germany

Personalised recommendations