Numerical study of grain rotation in polycrystalline metal during plastic deformation

Abstract

When polycrystalline metals deform plastically, respective grains rotate due to crystal slips on the active slip planes and the preferred orientation is produced. In the present paper, the rate-type constitutive equation and the constant stress model of polycrystals are adopted, and the grain rotation is calculated for fcc and bcc metals. The rate sensitivity exponent in the rate-type constitutive equation is closely related to the number of active slip systems. So, the effect of the number of active slip systems on the grain rotation or the formation of texture is numerically studied and discussed.

This is a preview of subscription content, log in to check access.

References

  1. 1.

    S. Nagashima,Texture, Maruzen (1984).

  2. 2.

    C. S. Barrett and L. H. Lavenson,Trans. AIME 137, 112 (1940).

    Google Scholar 

  3. 3.

    T. Abe, X. Lu, M. Nouno and T. Nanba,JSME Int. J., Ser. A 39, 237 (1996).

    CAS  Google Scholar 

  4. 4.

    T. Abe, T. Nanba and H. Nouno,Advances in Engineering Plasticity and Its Applications (ed., W. B. Lee), p. 591, Elsevier (1993).

  5. 5.

    T. Abe, M. Yamada and S. Nagaki,Advances in Plasticity 1989 (eds., A. S. Khan and M. Tokuda), p. 601, Pergamon (1989).

  6. 6.

    J. W. Hutchinson,Proc. Roy. Soc., Series A348, 101 (1976).

    Article  ADS  Google Scholar 

Download references

Author information

Affiliations

Authors

Corresponding authors

Correspondence to Takeji Abe or Yasuo Ono.

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Abe, T., Ono, Y. Numerical study of grain rotation in polycrystalline metal during plastic deformation. Metals and Materials 4, 376–379 (1998). https://doi.org/10.1007/BF03187795

Download citation

Key words

  • plasticity
  • crystal slip
  • grain rotation
  • deformation texture
  • polycrystalline metals