Zusammenfassung
Eine Kalziumbehandlung der Stahlschmelze wird häufig bei aluminiumberuhigten Stahlsorten durchgeführt. Dadurch werden hochschmelzende Aluminiumoxide zu Kalziumaluminaten mit niedrigerem Schmelzpunkt modifiziert und somit die Vergießbarkeit im Stranggießverfahren verbessert. Dazu wurden bei Voestalpine Stahl Donawitz Betriebsversuche durchgeführt, um Auswirkungen einer Kalziumbehandlung auf die Einschlusszusammensetzung und-morphologie zu untersuchen. Es wurden Reinheitsgraduntersuchungen und REM/EDX-Analysen von nichtmetallischen Einschlüssen bei unterschiedlichem Erzeugungsfortschritt vorgenommen. Besonders die Auswirkung eines höheren Schwefelgehaltes und größerer Kalziummengen standen im Mittelpunkt der Untersuchungen. Anhand der Ergebnisse konnten die Entstehung der Einschlüsse (Kalziumaluminate, Kalziumsulfid) nachvollzogen und Einflüsse auf den Reinheitsgrad aufgezeigt werden.
Abstract
The treatment of liquid steel with calcium is an often used practice, if the melt has been killed with aluminium. Thus high melting aluminium oxides are being modified to calcium aluminates with a lower melting point. This improves the castability in the continuous casting process. Therefore experiments have been carried out at Voestalpine Stahl Donawitz to determine the effects of a calcium treatment on the inclusion composition and morphology Tests of the steel purity and SEM/EDX-analyses of nonmetallic inclusions have been carried out. Main interest of the investigations were the influence of a high sulphur content in the melt and bigger amounts of calcium. By means of the results, the formation of inclusions (calcium aluminates, calcium sulphides) could be reproduced and influences on the steel purity could be shown.
Literaturverzeichnis
Ma, Z., andD. Janke: Deoxidation techniques used in steel-making processes and nozzle clogging. Proceedings of the 2nd International Congress on the Science & Technology of Steel-making 245–264, University of Wales Swansea, UK 2001.
Turkdogan, E. T.: Metallurgical consequences of calcium retention in liquid and solid steel. Proceedings of the International Calcium Treatment Symposium, Glasgow 1988.
Presern, V., B. Korousic andJ. W. Hastie: Thermodynamic conditions for inclusions modification in calcium treated steel. Steel Research62 (1991) Heft, 7, 289–295.
Bolender, T.: Verbesserung der Vergießbarkeit von Stählen mit erhöhtem Schwefelgehalt. Dissertation, Fakultät für Bergbau, Hüttenwesen und Maschinenwesen der Technischen Universität Clausthal, 1997.
Meyer, W., J. Hochörtler undA. Kucharz: Entwicklung auf dem Gebiet der Schmelz- und Sekundärmetallurgie zur Eigenschaftsverbesserung spezieller Stahlqualitäten. BHM140 (1995) 4–14.
Larsen, K.: Calcium modification of oxide inclusions. Proceedings of the 73rd Steelmaking Conference 497–506, Detroit 1990.
Holappa, L., M. Hämäläinen, M. Liukkonen andM. Lind: Thermodynamic examination on inclusion modification and precipitation from calcium treatment to solidified steel. Proceedings of the 6th International Conference on Clean Steel 116–125, Balatonfüred, Hungary 2002.
Author information
Authors and Affiliations
Additional information
Vortrag, gehalten beim ASMET-Forum für Metallurgie und Werkstofftechnik am 25. Mai 2005 in Leoben.
Rights and permissions
About this article
Cite this article
Huemer, K., Wolf, G., Sormann, A. et al. Auswirkungen einer Kalziumbehandlung auf die Entstehung und Zusammensetzung von nichtmetallischen Einschlüssen bei der Erzeugung von aluminiumberuhigten Stählen für Langprodukte. Berg Huettenmaenn Monatsh 150, 237–242 (2005). https://doi.org/10.1007/BF03165768
Issue Date:
DOI: https://doi.org/10.1007/BF03165768