Zusammenfassung
Um einen kontinuierlichen, parallenlen Planungsablauf in der intelligenten Fertigung sicherzustellen, müssen entsprechende Anforderungen an die Produktdaten für den Austausch von Computer zu Computer gestellt werden, damit diese Informationen vollständig erhalten und konsistent bleiben. Die Zielsetzung von reibungsfreiem Datenaustausch zwischen den Systemen zur Verarbeitung produktbeschreibender Daten ist es, Entwicklungszeiten zu reduzieren, Produkte mit höherer Qualität herzustellen und gleichzeitig die Kosten zu senken. Die Fähigkeit, die Produktinformationen in einem genormten, vom System und von der Umgebung des Computers unabhängigen format auszudrücken und diese Informationen mittles Rechner mit anderen zu teilen, soll es ermöglichen, daß geographisch getrennte Hersteller gemeinsam an den Abläufen der Konstruktion, Herstellung, Prüfung, Überwachung und Unterstützung eines Produkts arbeiten können.
Abstract
Specified requirements on the product data for the data exchange between various computer systems should be set up to ensure the continuous parallel processing in an environment of intelligent manufacturing systems. So the informations can be in consequence completely maintained and will remain consistent. The objective of the product data exchange between systems is to reduce the development time, to produce with higher quality and reduce the costs in the same time. Data communication of independent standardized format in an environment of intelligent manufacturing allows to share these informations with the other users integrated in a computer network and therefore the various tasks of the interaction between engineering, construction, inspection, evaluation and quality management can be carried out by geographical separated producers.
Schrifttum
VDA-Flächenschnittstelle (VDA-FS). Richtlinie des Verbands der Automobilindustrie e. V. (VDA), Frankfurt. 1988.
ISO 10303-1: 1994 (E) Industrial automation systems and integration — Product data representation and exchange, Part 1: Overview and fundamental principles.
Dimensional measuring interface standard 3.0, 1995.
Osanna, P. H., Si, L., Grün, K.: STEP — ein Modell für den Produktdatenaustausch. CONNEX 2 (1995), Nr. 24, S. 14 bis 17.
Durakbasa, M. N., Osanna, P. H., Prostrednik, D.: Koordinatenmeßtechnik und Datenkommunikation. Tagungsband: 11. Konferenz der Tschechischen Kalibrierungsvereinigung, Brno, CZ, Mai 1996, ISBN 80-214-0753-0, S. 111 bis 118.
Durakbasa, M. N.: Qualitätsmanagement als Schwerpunkt in CIM. Tagungsband: 12th International Conference BIAM’94, Zagreb, Croatia, Juni 1994, S. G1 bis G5.
Si, L., Durakbasa, M. N., Osanna, P. H.: Scanning and prototyping of freeform surface in advanced manufacturing environment. Proceedings of the international conference: 7th international machine design and production UMTIK’96, September 1996, Ankara, TR, S. 183 bis 189.
Author information
Authors and Affiliations
Additional information
Nach einem Vortrag, gehalten anläßlich des vom 17. bis 19. Oktober 1996 in Wien veranstalteten 7. Internationalen DAAAM-Symposiums.
Rights and permissions
About this article
Cite this article
Durakbasa, M.N. Produktdatenaustausch mit Koordinatenmeßgeräten in der intelligenten Fertigungsumgebung. Elektrotech. Inftech. 114, 200–202 (1997). https://doi.org/10.1007/BF03158662
Issue Date:
DOI: https://doi.org/10.1007/BF03158662