Zusammenfassung
Es wird ein Vorgehensmodell vorgestellt, das in der ELIN EBG Traction zur Entwicklung von Software und Hardware eingesetzt wird. Mit einem Vorgehensmodell wird ein komplexes Gesamtsystem in mehreren definierten Phasen entwickelt. In den Spezifikationsphasen wird das Gesamtsystem in mehreren Schritten auf überschaubare Komponenten aufgeteilt, in denen die Komplexität deutlich reduziert ist. In den Testphasen wird das Gesamtsystem gemäß den in den Spezifikationsphasen erstellten Testplänen getestet. Das alles erleichtert die Entwicklung, die Wartung und Änderungen. Außerdem wird in den Phasen festgelegt, welche Dokumente zu erstellen sind. Die Gründe für den Einsatz eines Vorgehensmodells und die Probleme bei der Einführung werden dargestellt.
Abstract
The article introduces a v-model that is used in the ELIN EBG Traction for the development of software and hardware. A v-model helps to develop a complex system in several defined phases. In the specification-phases the system is divided step by step into manageable components with reduced complexity. In the test-phases the system is tested with the test-plans generated in the specification-phases. All that makes the development, the maintenance and modifications much easier. Furthermore the documents to generate are determined in every phase. The reasons for the use of a v-model and the problems during implementation are illustrated.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Berger, C. Vorgehensmodell für die Entwicklung von Software und Hardware im Traktionsbereich. Elektrotech. Inftech. 120, 23–28 (2003). https://doi.org/10.1007/BF03054822
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03054822