Zusammenfassung
In Konfigurator-Lösungen können Constraints zur Darstellung und Verarbeitung von komplexen Regein verwendet werden. Die Benutzerschnittstelle eines Konfigurators wird durch das freie Wechseln zwischen manuellen Projektierungen, heuristischen Reparaturen und automatischen Lösungen größerer Schritte flexibel gestaltet. Die Experten-Anwender können rasch und gezielt Daten ändern, die gelegentlichen Anwender werden vom Konfigurator durch den Projektierungsablauf geführt.
Abstract
Constraints can be used in configurator solutions to display and process complex rules. The user interface of a configurator is designed in a flexible manner to change freely between manual project engineering, heuristic repair, and automatic solving of large steps. Expert users can quickly modify targeted data. Occasional users are guided by the configurator through the project engineering workflow.
Literatur
Ardissono, L., Felfernig, A., Friedrich, G., Goy, A., Jannach, D., Meyer, M., Petrone, G., Schaefer, R., Schuetz, W., Zanker, M., (2002): Personalising on-line configuration of products and services. Proc. 15th European Conf. on Artificial Intelligence, Lyon, France, July 2002: 225–229.
Fleischanderl, G., Friedrich, G., Haselböck, A., Schreiner, H., Stumptner, M. (1998): Configuring large systems using generative constraint satisfaction. IEEE Intelligent Systems & their applications, 1998, 13 (4): 59–68.
Fleischanderl, G., Friedrich, G., Haselböck, A., Schreiner H., Stumptner, M. (2001): Constraints als Schlüssel zu industriellen Konfigurator-Lösungen (Constraints as key to industry configurator solutions). e&i, 118 (2001), H. 7/8: 349–353.
Krebs, T., Wagner, T., Runte, W. (2003): Recognizing user intentions in incremental configuration processes. Configuration Workshop, 2003: 44–50.
Minton, S., Johnston, M. D., Philips, A. B., Laird, P. (1992): Minimizing conflicts: a heuristic repair method for constraint-satisfaction and scheduling problems. Artificial Intelligence, 1992, Vol. 58: 161–205.
Sabin, D., Weigel, R. (1998): Product configuration frameworks — a survey. IEEE Intelligent Systems & their applications, 1998, 13 (4): 42–49.
Schenner, G., Falkner, A. (2002): Ideas for removing constraint violations with heuristic repair. Configuration — Papers from the Workshop at ECAI, Lyon, France, July 2002: 27–29.
Schenner, G., Fleischanderl, G. (2003): Modifying configurations with model finding. Configuration — Papers from the Workshop at IJCAI, Acapulco, Mexico, Aug. 2003: 27–31.
Stumptner, M., Friedrich, G. E., Haselböck, A. (1998): Generative constraint-based configuration of large technical systems. Al EDAM, 1998, 12 (4): 307–320.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Falkner, A., Fleischanderl, G. & Schenner, G. Constraints an der Benutzerschnittstelle von Konfigurator-Lösungen. Elektrotech. Inftech. 122, 253–256 (2005). https://doi.org/10.1007/BF03054438
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03054438