Abstract
In this paper the development of a tool for a fast and simple evaluation of the technical condition of electrical networks will be presented. With this tool it is possible to compare different networks and network sections of different power suppliers as well as utilities of the same voltage level or network sections of the same utilities. Whole networks, but also individual components such as transformers and switchgears can be evaluated. An exact condition evaluation of networks represents a disproportionately large expenditure of time. To get a fast overview over the technical condition of networks and electrical components the knowledge of experts is necessary. The presented method takes into consideration both: expert knowledge as well as the consideration of age, maintenance and operating loads of networks and their components. These aspects are included in reliability computation mathematical functions which will be used in the developed technical condition evaluation tool. Beside the evaluation of the technical condition the tool is based on the maintenance expenditure and the priority of the examined networks, too.
Zusammenfassung
In dieser Arbeit wird ein Weg für eine rasche und einfache Evaluierung des technischen Zustands von elektrischen Verteilnetzen aufgezeigt. Mit dem erstellten Werkzeug ist es möglich, verschiedene Netzwerke und Netzwerkabschnitte der gleichen Spannungsebenen auch von unterschiedlichen Netzbetreibern miteinander zu vergleichen. Dabei können sowohl einzelne Komponenten wie zum Beispiel Transformatoren, Kabel oder Schaltanlagen als auch ganze Netze evaluiert werden. Eine exakte Beurteilung des technischen Zustands eines ganzen Netzwerks würde einen sehr großen Aufwand bedeuten. Um jedoch eine einfache und rasche Übersicht über den Zustand eines Netzes und dessen Komponenten zu erhalten, wird auf Expertenwissen zurückgegriffen. Für die entwickelte und vorgestellte Methode wurden Fachwissen des Betriebs- und Instandhaltungspersonals als auch Daten aus dem Netz wie zum Beispiel Betriebsmittelalter, Betriebsbelastungen, Wartungs- und Instandhaltungstältigkeiten usw. zusammengeführt und entsprechend mathematisch aufgearbeitet. Dies wurde in Folge in einem Bewertungswerkzeug für die Evaluierung des Zustands von elektrischen Netzen und Betriebsmitteln eingesetzt.
Similar content being viewed by others
References
Endrendyi, J., Anders, G. J., Leite da Silva, A. M. (1998): Probabilistic evaluation of the effect of maintenance on reliability — an application. IEEE Trans. on Power Systems 13 (2).
ÖNORM M 8100 (1985, April): Instandhaltung, Benennungen, Definitionen und Maßnahmen.
ÖNORM EN 13306 (2001, August): Begriffe der Instandhaltung.
Sumereder, C., Muhr, M. (2003): Lifetime management of power transformers. CIRED 2003, Barcelona.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Muhr, M., Körbler, B., Sumereder, C. et al. Basics of condition evaluation in distribution networks. Elektrotech. Inftech. 120, 446–450 (2003). https://doi.org/10.1007/BF03053978
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03053978