Abstract
The preparation of high permeability manganese zinc ferrous ferrites is rather complicated and if one is to achieve high permeability and the other essential electrical characteristics of low losses, low temperature coefficient, relatively high specific resistivity, etc., quality controls at various stages of processing is essential. The microstructure of the sintered samples do have considerable influence on the electrical properties. The microstructure and the electrical properties of many specimens are correlated with raw material purity, firing conditions such as atmosphere, oxygen content, temperature of soaking, etc.
Similar content being viewed by others
References
Chol, G., Datnay, F., Auradon, J. P., Strivens, M. A.,Elec. Comm. 43 263 (1968).
Guillaud, C. and Paulus, M.,Acad. Sci., Paris 242 2525 (1956).
Heister, W.,J. Appl. Phys. 30 228 (1959).
Heister, W.Techn. Mitt. Krupp. Forsch. Ber. 28 131 (1970).
Nair, N. R., Khanduja, R. S., Ramamurti, T. V.,Proc. Symp. Mat. Sci. Res. D.A.E.1 400 (1970).
Ross, E. and Hanke,Z. Angew. Physik. 29 (No. 4) 225 (1970).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Alam, M.I., Devi Rao, S., Ramachandran, R. et al. Studies on micro-structure of manganese zinc ferrous ferrite in relation to its impurities and firing conditions. Proc. Indian Acad. Sci. 82, 88–91 (1975). https://doi.org/10.1007/BF03046702
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF03046702