Abstract
We suggest a new type of swing motion control system for a crane system in which a small auxiliary mass is installed on the spreader. The actuator reacting against the auxiliary mass applies inertial control forces to the spreader of the container crane to reduce the swing motion in the desired manner. In this paper, as the basic and first step, we apply theH ∞, control approach to anti-sway control system design problem. And, it will be shown that the proposed control strategy is useful and it can be easily applicable to the real world. So, in this study, we investigate usefulness of the proposed anti-sway system and evaluate system performance through simulation and experimental studies.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Cheng, W. and Li, X., 1993, “Computer Control of High Speed Cranes,”Processing of the American Control Conference, pp. 2562–2566.
Hong, K. S., Sohn, S. C. and Lee, M. H., 1997, “Sway Control of a Container Crane (Part I): Modeling, Control Strategy, Error Feedback Control Via Reference Velocity Profiles,”Journal of Control, Automation and Systems Engineering, Vol. 3, No. 1, pp. 23–31. (in Korean)
Hong, K. S., Sohn, S. C. and Lee, M. H., 1997, “Sway Control of a Container Crane (Part II): Regulation of the Pendulum Sway through Patternizing Trolley Moving Velocity,”Journal of Control, Automation and Systems Engineering, Vol. 3, No. 2, pp. 132–138. (in Korean)
Hong, K. S., 1999, “Container Crane Control: Modified Time-Optimal Traveling Followed by Nonlinear Residual Sway Control,”Journal of Control, Automation and Systems Engineering, Vol. 5, No. 5, pp. 630–639. (in Korean)
Hong, K. S., Park, B. J. and Lee, M. H., 2000, “Two-Stage Control for Container Cranes,”JSME International Journal, Series C, Vol. 43, pp. 273–282.
Hong, K. T., Huh, C. D. and Hong, K. S., 2003, “Command Shaping Control for Limiting the Transient Sway Angle of Crane Systems,”International Journal of Control, Automation, and Systems, Vol. 1. No. 1, pp. 43–45.
Kim, Y. B., 2002, “Anti Sway System of the Crane,” Korean patent, No. 0350780.
Lee, C. K., 2001, “The Modeling and Position Control of Overhead Cranes,”Transaction of the KSME, Vol. 25, No. 12, pp. 1919–1925. (in Korean)
Nomura, N., Hakamada, Y. and Saeki, H., 1997, “Anti-sway Position Control of Crane Based on Acceleration Feedback and Predicted Pattern Following Method,”Trans. of the Institute of Elec. eng. of Japan (D), Vol. 17, No. 11, pp. 1341–1347.
Noriaki, M., Ukita, T., Nishioka, M., Monzen, T. and Toyohara, T., 2001, “Development of Feedforward Anti-sway Control for High Efficient and Safety Crane Operation,”Mitsubishi Heavy Ind. Technical Review, Vol. 38, No. 2, pp. 73–77.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, YB. A new approach to anti-sway system design problem. KSME International Journal 18, 1306–1311 (2004). https://doi.org/10.1007/BF02984244
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02984244