Handbook on life cycle assessment operational guide to the ISO standards

This is a preview of subscription content, access via your institution.

References

  1. [1]

    Heijungs R, Guinée JB, Huppes G, Lamkreijer RM, Udo de Haes HA, Wegener Sleeswijk A, Ansems AMM, Eggels PG, van Duin R, de Goede HP (1992): Environmental Life Cycle Assessment of Products. Guide (Part 1) and Backgrounds (Part 2), prepared by CML, TNO and B&G. Leiden October 1992. English Version 1993

  2. [2]

    Society of Environmental Toxicology and Chemistry (SETAC) (1993): Guidelines for Life-Cycle Assessment: A ‘Code of Practice’. From the SETAC Work-shop held at Sesimbra, Portugal, 31 March-3 April 1993. Edition 1, Brussels and Pensacola (Florida)

  3. [3]

    International Standard Organization (ISO) (1997): Environmental management — Life cycle assessment — Principles and framework. ISO 14040, June 1997

  4. [4]

    Habersatter K, Widmer F (1991): Oekobilanzen von Packstoffen. Stand 1990. In: Bundesamt für Umwelt, Wald und Landschaft (BUWAL), Bern (Hrsg): Schriftenreihe Umwelt Nr 132

  5. [5]

    Guinée J (2001): Handbook on Life Ccyle Assessment — Operational Guide to the ISO Standards. Editorial in Int J LCA 6 (5) 255

    Article  Google Scholar 

  6. [6]

    Marsmann M (2000): The ISO 14040 Family. Editorial in Int J LCA 5 (6) 317–318

    Article  Google Scholar 

  7. [7]

    Klüppel H-J (2002): The ISO Standardization Process: Quo Vadis? Editorial in Int J LCA 7(1) 1

    Article  Google Scholar 

  8. [8]

    Udo de Haes HA, Jolliet O, Finnveden G, Goedkoop M, Hauschild M, Hertwich EG, Hofstetter P, Klöpffer W, Krewitt W, Lindeijer EW, Mueller-Wenk R, Olson SI, Pennington DW, Potting J, Steen B (eds) (2002): Life Cycle Impact Assessment: Striving Towards Best Practice. ISBN 1 -880611—54-6. SETAC Press, Pensacola (Florida, USA)

    Google Scholar 

  9. [9]

    Töpfer K (2002): The Launch of the UNEP-SETAC Life Cycle Initiative. Editorial in Int J LCA 7 (4) 191 and following papers in this issue

    Article  Google Scholar 

  10. [10]

    Frische R, Klöpffer W, Esser G, Schönborn W (1982): Criteria for Assessing the Environmental Behavior of Chemicals: Selection and Preliminary Quantification. Ecotox Environ Safety 6 283–293

    Article  CAS  Google Scholar 

  11. [11]

    Klöpffer W (1997): In Defense of the Cumulative Energy Demand. Editorial in No 2, Int J LCA 2 61

    Article  Google Scholar 

  12. [12]

    Frischknecht R (1997): The Seductive Effect of Identical Physical Units. Int J LCA 2, 125–126

    Article  Google Scholar 

  13. [13]

    Frischknecht R, Heijungs R, Hofstetter P (1998): Einstein’s Lessons for Energy Accounting in LCA. Int J LCA 3 266–272

    CAS  Article  Google Scholar 

  14. [14]

    Eganhouse RP, Pontolillo J (2002): Assessing the Reliability of Physico-Chemical Property Data (Kow Sw) for Hydrophobic Organic Compounds: DDT and DDE as a Case Study. SETAC Globe 3 (4) 34–35

    Google Scholar 

  15. [15]

    Barnthouse L, Fava J, Humphreys K, Hunt R, Laibson L, Noesen S, Norris G, Owens J, Todd J, Vigon B, Weitz K, Young J (eds) (1998): Life-Cycle Impact Assessment: The State-of-the-Art. Report of the SETAC Life-Cycle Assessment (LCA) Impact Assessment Workgroup. 2nd edition. Society of Environmental Toxicology and Chemistry. Pensacola, Florida, USA

    Google Scholar 

Download references

Author information

Affiliations

Authors

Corresponding author

Correspondence to Jeroen B. Guinee.

Additional information

1 Publications by Jeroen Guinée in Int J LCA: Int J LCA 7 (3) 158-166 (2002): Environmental Life Cycle Assessment of Linoleum Int J LCA 6 (5) 255 (2001): Handbook on Life Cycle Assessment – Operational Guide to the ISO Standards Int J LCA 1 (3) 133-138 (1996): USES—Uniform System for the Evaluation of Substances

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Guinee, J.B. Handbook on life cycle assessment operational guide to the ISO standards. Int J LCA 7, 311 (2002). https://doi.org/10.1007/BF02978897

Download citation