Skip to main content

Life Cycle assessment of a plastic packaging recycling system

Abstract

Goal, Scope and Background.

The object of the study is the Italian system of plastic packaging waste recycling, active until 2001, that collected and mechanically recycled the post-consumer PE and PET liquid containers. The phases of collection, compaction, sorting, reprocessing and refuse disposal were individually analysed and quantified in terms of energy and material consumptions as well as of emissions in the environment. The work is the result of a joint research project with the Italian Consortium for Packaging (CONAI), carried out in co-operation with the main Italian companies active in the field. The main aim was the quantification of the real advantage of plastic container recycling and the definition of criteria, at the same time environmentally compatible and economically sustainable, for their management.

Main Features

For each of the unit processes, and in order to increase the data quality, all the data of interest were collected during technical visits to several selected plants active in Italy or deduced by official documents and certificate declarations of the same companies. To allow comparison of resource consumption and environmental pollution from different management scenarios producing different products, thebasket of products method was applied.

Results

The results indicates that the production of 1 kg of flakes of recycled PET requires a total amount of gross energy that is in the range of between 42 and 55 MJ, depending on whether the process wastes (mainly coming from sorting and reprocessing activities) were sent or not to the energy recovery. The same quantity of virgin PET requires more than 77 MJ. The energetic (and then environmental) saving is so remarkable, even for PE, being 40–49 MJ for the recycled polymer and about 80 MJ that for the virgin polyolefin. The calculations were made with the reasonable assumption that the final utilisation can use the virgin or the recycled polymer without any difference.

Conclusions and Outlook

The analysis defined and verified a suitable tool in the field, based on objective data, for comparing different coherent scenarios of waste management politics. This allows one to propose the extension of the tool under different collection schemes, as well as for different systems of packaging recycling. As an immediate consequence of the success of the present study, the joint-research programme with CONAI has been extended for another three years. The focus will be the Italian system for paper and paperboard recycling and that for all plastic packagings. In parallel, a different study has been scheduled with reference to the integrated solid waste management of the Regione Campania, the largest and most populated area in the South of Italy.

This is a preview of subscription content, access via your institution.

References

  1. Ademe and Eco-Emballages (2001): Déchets ménagers: leviers d’améliorations des impacts environnementaux. Ademe/Eco-Emballages co-editors, Levallois-Perret, France

    Google Scholar 

  2. Arena U, Mastellone ML, Perugini F (2001): Final Report of CONAI-DSA Joint Res. Prog., also summarized in PLAST (2002) 4, 97–99

  3. Asante-Duah DK (1998): Risk Assessment in Environmental Management. J. Wiley & Sons Ltd, New York

    Google Scholar 

  4. Beccali G, Yellula M, Ristretta M (2001): Managing Municipal Solid Waste. Int J LCA 6 (4) 243–249

    CAS  Google Scholar 

  5. Bez J, Heyde M, Goldhan G (1998): Waste Treatment in Product Specific Life Cycle Inventories. Int J LCA 3 (2) 100–105

    CAS  Article  Google Scholar 

  6. Brandrup J, Bittner M, Michaeli W, Menges G (1996): Recycling and Recovery of Plastics. Hanser Publ., New York

    Google Scholar 

  7. Boustead I (1996): Theory and Definitions in Ecobalances. In: Brandrup et al. (eds) Recycling and Recovery of Plastics. Hanser Publ., New York, pp. 73–93

    Google Scholar 

  8. Clift R, Doig A, Finnveden G (2000): The Application of Life Cycle Assessment to Integrated Waste Management. Part 1 — Methodology. Trans IchemE 78 (B) 279–287

    CAS  Google Scholar 

  9. Ebert F, Fleischer G, Holley W (1996): Life-Cycle Analysis of Recycling and Recovery of Household Plastics Waste Packaging materials. In: Brandrup et al. (eds) Recycling and Recovery of Plastics. Hanser Publ., New York, pp. 168–192

    Google Scholar 

  10. Finneveden G et al. (1995): Solid Waste Treatment within the Framework of Life Cycle Assessment. J Cleaner Prod 3 (4) 189–199

    Article  Google Scholar 

  11. Heyde M, Kremer M (1999): Recycling and Recovery of Plastics from Packagings in Domestic Waste. LCA-type Analysis of Different Strategies. LCA Documents Vol. 5, ecomed publishers, Landsberg, Germany

    Google Scholar 

  12. Mastellone ML (1999): Thermal Treatments of Plastic Wastes by means of Fluidized Bed Reactors. PhD Thesis in Chemical Engineering, University ‘Federico II’ of Naples

  13. Mastellone ML, Perugini F, Arena U (2002): Life Cycle Assessment of Mechanical Recycling of Plastic Containers for Liquids. 2nd Int. Conf. on Polymer Modification, Degradation and Stabilisation, ISBN 963-420-723–5, Budapest (Hungary), June 30-July 4

  14. McDougall FR, White P, Franke M, Hindle P (2001): Integrated Solid Waste Management: a Life cycle Inventory. 2nd ed., Blackwell Science

  15. Weitz K, Barlaz M, Ranjithan R, Brill D, Thorneloe S, Ham R (1999): Life Cycle Management of Municipal Solid Waste. Int J LCA 4 (4) 195–201

    Google Scholar 

Download references

Author information

Affiliations

Authors

Corresponding authors

Correspondence to Umberto Arena, Maria Laura Mastellone or Floriana Perugini.

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Arena, U., Mastellone, M.L. & Perugini, F. Life Cycle assessment of a plastic packaging recycling system. Int J LCA 8, 92 (2003). https://doi.org/10.1007/BF02978432

Download citation

Key words

  • Life cycle assessment
  • PE containers
  • PET containers
  • plastic packaging
  • plastic recycling