Abstract
This paper describes development of the optical current transducers using flint glass fiber as the Faraday effect sensing element. Excellent polarization properties of the fiber with low birefringence are described, and the design and test data of a current transducer using the fiber manufactured for use in electric power facilities are reviewed. Experimental results on flexible characteristics of a scheme with round trip light transmission in the fiber is also reported.
Similar content being viewed by others
References
S. Saito, J. Hamasaki, Y. Fujii, K. Yokoyama and Y. Ohno: IEEE J. Quantum Electron.QE-3 (1967) 589.
For example, A.M. Smith: Appl. Opt.17 (1978) 52.
K. Kurosawa, I. Masuda and T. Yamashita:Proc. 9th Optical Fiber Sensors Conf. (1993) p. 415.
T. Yamashita, A. Watabe, I. Masuda, K. Sakamoto, K. Kurosawa and S. Yoshida:Proc. 11th Optical Fiber Sensors Conf. (1996) p. 168.
K. Kurosawa, S. Yoshida and K. Sakamoto: IEEE J. Lightwave Technol.13 (1995) 1378.
J.N. Ross: Opt. Quantum Electron.16 (1984) 455.
K. Kurosawa, Y. Yoshida, K. Sakamoto, I. Masuda and T. Yamashita: Trans. IEE Jpn.116-B (1996) 93.
S. Yoshida, K. Kurosawa and O. Sano:Proc. 11th Optical Fiber Sensors Conf. (1996) p. 172.
K. Kurosawa, S. Yoshida and O. Sano: 1996 National Convention Record IEE Japan, No. 1171.
K. Kurosawa, S. Yoshida and S. Horiuchi: 1992 National Convention Record IEE Japan, No. 866.
K. Kurosawa:Proc. 11th Optical Fiber Sensors Conf. (1996) p. 134.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kurosawa, K. Optical current transducers using flint glass fiber as the faraday sensor element. Optical Review 4, A38–A44 (1997). https://doi.org/10.1007/BF02935987
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02935987