Abstract
Low-pressure mercury lamps are commonly used for germicidal applications such as water and wastewater sterilisation. The germicidal effect is due to the emission of light at 254 nm, which leads to the destruction of most waterborne bacteria. The Microwave plasma ultraviolet lamp (MPUVL) is a new technology for generating a high intensity ultraviolet (UV) light. A Fluorescent optical fiber based sensor is presented which is used for monitoring the output of a high power microwave UV light source and its control. This sensor is a fiber which has had its cladding removed and been coated with a phosphor doped polymer.
Similar content being viewed by others
References
M. Moisan and Z. Zakrzewski: Plasma Sources Sci. Technol.4 (1995) 379.
M. Moisan, C. Beaurdry and P. Leprince: IEEE Trans. Plasma Sci.PS-2 (1975) 55.
C. Fitzpatrick, E. Lewis, A. Al-Shamma’a and J. Lucas:Optical Sensors and their Applications X (Cardiff, Wales, 1999) p. 51.
D. Marcuse: J. Lightwave Technol.6 (1988) 1273.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Fitzpatrick, C., Lewis, E., Al-Shamma’a, A. et al. An optical fiber sensor based on cladding photoluminescence for high power microwave plasma ultraviolet lamps used in water treatment. Optical Review 8, 459–462 (2001). https://doi.org/10.1007/BF02931735
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02931735