Abstract
The shape stiffness of millm is defined as the crosswise rigidity of the unit width of steel plate, that is,m=k/b. By differentiating the steel plate crown equation in the vector model of steel plate shape, a new concise equation for the shape stiffness,k c=m+q, is obtained. Furthermore, by combining the calculation equation for steel plate crown derived from Castigliano’s theorem, an analytical calculation equation for the shape rigidity of rolled steel plate is derived. The correctness and practicability of the theory for the shape stiffness are demonstrated by comparing the results from the numerical calculation with the practical data of a rolling mill.
Similar content being viewed by others
References
Nakajama, K., Kikuma, T., Matsumoto, H. et al., Crown control technology in hot strip mill operation, Seitetsu Kenkyu, 1979, 202: 192.
Zhang Jinzhi, Shape measuring and controlling model for steel plate rolling process, Metallurgical Equipment, 1997, 106(6): 1.
Zhang Jinzhi, New shape measuring and controlling method and its application, Heavy Machinery, 1998, 219(4): 5.
Lian Jiachuang, Liu Hongming, Thickness and Shape Controlling, Beijing: Weaponry Industry Press, 1996.
Luoyang Nonferrous Processing Institute, Equipment of Strip Workshop (in Chinese), Beijing: Metallurgical Industry Press.
Ohe, K., Morimoto, Y., Development of shape control for mill of medium and heavy steel plate, in Proceedings of the Sixth International Rolling Conference, Beijing: The Chinese Society for Metals, 1994.
Jonsson, N. G., Pekka, M., A Rolling program for optimizing section and shape of steel plate, Foreign Iron and Steel, 1989 159(3): 9.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhang, J. Analytical theory for shape stiffness. Sci. China Ser. E-Technol. Sci. 43, 337–343 (2000). https://doi.org/10.1007/BF02916980
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02916980