This is a preview of subscription content, log in via an institution to check access.
References
A.K. Biswas and W.G. Davenport,Extractive Metallurgy of Copper, 2nd ed. and 3rd ed. (New York: Pergamon Press, 1980 and 1994).
T.N. Antonioni et al.,Control of the Inco Flash Smelting Process in Copper Smelting—An Update, ed. D.B. George and J.C. Taylor, (Warrendale, PA: TMS, 1982), pp. 17–31.
P. Bryk et al., “Flash Smelting Concentrates,”J. Metals, 10 (6) (1958), pp. 395–400.
N.J. Themilis et al., “The Noranda Continuous Process for Continuous Smelting,”J. Metals. 24 (4) (1972), pp. 25–32.
T. Nagano and T. Suzuki,Extractive Metallurgy of Copper, vol. 1, ed. J.C. Yannopoulous and J.C. Agarwal (New York: AIME, 1976), pp. 439–457.
J.M. Floyd,Proceedings of the Savard Lee International Symposium of Bath Smelting, ed. J.K. Brimacombe e al. (Warrendale, PA: TMS, 1992), pp. 103–123.
D.L. Kaiser and J.F. Elliott,Metall. Trans., 17B (1986), pp. 147–157.
R. Sridhar, J.M. Toguri, and S. Simeonov, to be published inMet. Trans.
C.W. Bale and J.M. Toguri,Can. Metall. Q., 15 (1976), pp. 305–318.
S.R. Simeonov, R. Sridhar, and J.M. Toguri,Metall. Trans., 26B (1995), pp. 325–333.
S.R. Simeonov, R. Sridhar, and J.M. Toguri,Proceedings of the Symposium on Recent Developments in Non-Ferrous Pyrometallurgy, (Montreal, Canada: CIM, 1994), paper 49.3.
A. Yazawa (Paper presented at the 28th Congress of IUPAC, Vancouver, Ausgust 1981).
J.M. Matousek,Can. Metall. Q., 32 (1993), pp. 97–101.
A. Yazawa and T. Azakami,Can. Metall. Q., 8 (1969), pp. 257–261.
K. Sano and H. Sakao,J. Japan Inst. Metals, 19 (1955), pp. 431–655.
M. Goto, et al.,J. Metals., 38 (9) (1986), pp. 43–45.
C. Diaz and C.A. Landolt, “Metallurgy of Inco Flash Furnace with Converter Slag Recycle,”Minerales, 41 (July–September 1986).
M.C. Bell et al.,J. Metals, 30 (10) (1978), pp. 4–14.
J.M. Floyd, D.S. Conochie, and N.C. Grave,Proc. Australas. Inst. Min. Metall., No. 270 (1979), pp. 15–23.
G. Victrovitch, “Precipitation of Copper on Cooling of Iron Silicate Slags” (Paper presented at CIM Conference of Metallurgists and International Symposium on Metallurgical Slags, Nova Scotia, August 24–28 (1980).
M. Nagamori,Metall. Trans., 5B (1974), pp. 531–538.
A. Yazawa, S. Nakazawa, and Y. Takeda,Advances in Sulfide Smelting, vol. 1, ed. H.Y. Sohn, D.B. GeorgE, and A.D. Zunkel (Warrendale, PA: TMS, 1983), pp. 99–117.
R. Shimpo et al.,Can. Metall. Q., 25 (1986), pp. 113–121.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Sridhar, R., Toguri, J.M. & Simeonov, S. Thermodynamic considerations in copper pyrometallurgy. JOM 49, 48–52 (1997). https://doi.org/10.1007/BF02914876
Issue Date:
DOI: https://doi.org/10.1007/BF02914876