References
Statistical Abstract of the United States, 115th ed. (Washington, D.C.: U.S. Bureau of the Census, 1995).
J.W. Evans and J. Szekely,J. Metals, 37 (12) (1985), pp. 40–44.
Employment Projections for 1995 (Washington, D.C.: U.S. Department of Labor, 1984).
T.J. Kim,Copper Smelting—an Update, ed. D.B. George and J.C. Taylor (Warrendale, PA: TMS, 1981), pp. 33–39.
D.E. Holt,Flash Reaction Processes, ed. D.G.C. Robertson, H.Y. Sohn, and N.J. Themelis (Rolla, MO: U. of Missouri-Rolla, 1988), pp. 1–17.
T. Suzuki et al., in Ref. 4,, pp. 51–76.
P.J. Mackey, J.B. Bailey, and G.D. Hallett, in Ref. 4,, pp. 213–236.
G. Lindkvist, P.-L. Nystedt, and S. Petersson, in Ref. 4,, pp. 41–49.
G. Munoz, G. Vera, and H. Salazar, in Ref. 4,, pp. 143–163.
I.S. Blair et al.,Extractive Metallurgy of Copper, ed. J.C. Yannopoulos and J.C. Agarwal (Warrendale, PA: TMS, 1976), pp. 168–196.
R.E. Johnson, N.J. Themelis, and G.A. Eltringham,Copper and Nickel Converters, ed. R.E. Johnson (Warrendale, PA: TMS, 1979), pp. 1–32.
J.G. Gomez, in Ref. 11,, pp. 291–311.
M. Goto and K. Kanamori, in Ref. 11,, pp. 210–224.
M.R. Toivanen,Metallurgical Processes for the Early Twenty-First Century, Vol. 2. Technology and Practice, ed. H.Y. Sohn (Warrendale, PA: TMS, 1994), pp. 31–40.
I.V. Kojo and P. Hanniala, in Ref. 14,, pp. 89–102.
M. Goto, in Ref. 14,, pp. 115–124.
S. Ajima, M. Hayashi, and Y. Nishiyama, in Ref. 14,, pp. 161–176.
S.W. Marcuson et al.,Proceedings of Copper 95, Vol. IV. Pyrometallurgy of Copper, ed. W.J. Chen et al. (Montreal: CIM, 1995), pp. 271–279.
L. Deininger, K.C. Choi, and A. Siegmund,EPD Congress 1994, ed. G.W. Warren (Warrendale, PA: TMS, 1994), pp. 477–501.
K.C. Choi, H.J. Kim, and Y.H. Lee, in Ref. 14,, pp. 317–331.
P.E. Queneau and A. Siegmund,JOM, 48 (4) (1996), pp. 38–44.
D.B. George, R.J. Gottling, and C.J. Newman, in Ref. 18,, pp. 41–52.
E.N. Mounsey and K.R. Roblliard,JOM, 46 (8) (1994), pp. 58–60.
H. Weigel and G. Melcher, U.S. patent 4,362,561 (7 December 1982).
K.B. Chaudhuri, M. Koch, and J.L. Patino,Can. Inst. Min. Metall. Bull., 73 (817) (1980), pp. 146–150.
V.P. Bystrov, A.A. Komkov, and L.A. Smirnov, in Ref. 18,, pp. 167–178.
A.V. Tarasov and P.A. Kovgan, in Ref. 18,, pp. 383–388.
H.Y. Sohn,JOM, 46 (8) (1994), p. 50.
J.A. Asteljoki et al.,J. Metals, 37 (5) (1985), pp. 20–23.
H.Y. Sohn, M. Perez-Tello, and K.M. Riihilahti,Third Colloquium on Process Simulation, ed. A. Jokilaakso (Espoo, Finland: Helsinki U. of Tech., 1996), pp. 187–217.
Y.B. Hahn and H.Y. Sohn,Metall. Trans. B, 21B (1990), pp. 945–958; 959–966.
H.Y. Sohn, Annual review article on developments in physical chemistry and basic principles,JOM, 28 (3) (1976), pp. 29–33; 29 (3) (1977), pp. 31–35; 30 (4) (1978), pp. 25–30; 31 (5) (1979), pp. 10–11, 29–32; 32 (4) (1980), pp. 16–19; 33 (4) (1981), pp. 18–23; 34 (4) (1982), pp. 44–50; 35 (4) (1983), pp. 36–41; 36 (4) (1984), pp. 48–53; 37 (4) (1985), pp. 51–57; 38 (4) (1986), pp. 43–48; 39 (4) (1987), pp. 28–34; 40 (4) (1988), pp. 38–44; 41 (4) (1989), pp. 59–64; 43 (4) (1991), pp. 36–42; and 44 (4) (1992), pp. 50–55.
H.Y. Sohn and W.D. Cho, “Developments in Physical Chemistry and Basic Principles,”JOM 45 (4) (1993), pp. 40–44; 46 (4) (1994), pp. 43–50; 47 (4) (1995), pp. 60–65; 48 (4) (1996), pp. 56–61.
J. Hino,Proceedings of Copper 95, vol. 3. Electrorefining and Hydrometallurgy of Copper, ed. W.C. Cooper et al. (Montreal: CIM, 1975), pp. 617–627.
T. Lehner, ed.,Co-Products and Minor Elements in Nonferrous Smelting (Warrendale, PA: TMS, 1995).
H.G. Kim and H.Y. Sohn,EPD Congress 1991, ed. D.R. Gaskell (Warrendale, PA: TMS, 1991), pp. 437–467.
H.G. Kim and H.Y. Sohn,Pyrometallurgy of Copper, ed. C. Diaz et al. (New York: Pergamon, 1991), pp. 617–636;Trans. Inst. Min. Metall., Section C., 105 (1996), pp. C151–C163.
H.G. Kim and H.Y. Sohn,First International Conference on Processing Materials for Properties, ed. H. Henein and T. Oki (Warrendale, PA: TMS, 1993), pp. 365–368.
H.G. Kim and H.Y. Sohn,Can. Metall. Quart., 36 (1997), pp. 31–37;EPD Congress 1992, ed. J.P. Hager (Warrendale, PA: TMS, 1991), pp. 1031–1046.
K.W. Seo and H.Y. Sohn,Metall. Trans. B, 22B (1991), pp. 791–799.
P.C. Chaubal et al.,Metall. Trans. B, 20B (1989), pp. 39–51.
P.C. Chaubal and M. Nagamori,Metall. Trans. B, 19B (1988), pp. 547–556.
C. Acuna and A. Yazawa,Trans. Jap. Inst. Metals, 27 (1986), pp. 881–889.
Y. Takeda and A. Yazawa,Productivity and Technology in Metallurgical Industry, ed. M. Koch and J.C. Taylor (Warrendale, PA: TMS, 1989), pp. 227–239.
H.G. Kim, “Minor Element Behavior in Pyrometallurgical Coppermaking Systems,” Ph.D. dissertation, University of Utah (1993).
N. Choi, “Distribution of Minor Elements between Nickel-Copper Matte and Silica-Saturated Iron Silicate Slag,” Ph.D. dissertation, University of Utah (1996).
M. Nagamori and P.J. Mackey,Metall. Trans. B, 9B (1978), pp. 255–265; pp. 567–579.
R.S. Celmer and J.M. Toguri,Nickel Metallurgy, Vol. 1: Extraction and Refining of Nickel, ed. E. Ozberg and S.W. Marcuson (Montreal: CIM, 1986), pp. 147–163.
R.S. Celmer and J.M. Toguri,Extractive Metallurgy of Nickel and Cobalt, ed. G.P. Tyroler and C.A. Landolt (Warrendale, PA: TMS, 1988), pp. 307–323.
S.N. Sinha, H.Y. Sohn, and M. Nagamori,Metall. Trans. B, 16B (1985), pp. 53–59.
I.V. Kojo, P.A. Taskinen, and K.R. Lilius,Metall. Trans. B, 16B (1985), pp. 171–172.
S. Tandon, R.D. Agrawal, and M.L. Kapoor,Scand. J. Metall., 22 (1993), pp. 237–240.
H. Fukuyama, T. Fujisawa, and C. Yamauchi,Metallurgical Processes for the Early Twenty-First Century, Vol. 1. Basic Principles, ed. H.Y. Sohn (Warrendale, PA: TMS, 1994), pp. 443–452.
J. Szekely, J.W. Evans, and H.Y. Sohn,Gas-Solid Reactions (New York: Academic Press, 1976).
H.Y. Sohn and M.E. Wedsworth, ed.,Rate Processes of Extractive Metallurgy (New York: Plenum, 1979).
H.Y. Sohn, lecture notes, University of Utah (1996).
L. Zhou and H.Y. Sohn,Light Metals 1994, ed. U. Mannweiler, (Warrendale, PA: TMS, 1994), pp. 1141–1152.
I.-J. Youn and K.-Y. Park,Metall. Trans. B, 20B (1989), pp. 959–966.
K.I. Rhee and H.Y. Sohn,Metall. Trans. B, 21B (1990), pp. 331–339.
D.G.C. Robertson, L.R. Nelson, and K.N. Swamy,Scand. J. Metall., 22 (1993), pp. 283–306.
S. Saha Roy et al.,Scand. J. Metall., 21 (1992), pp. 26–30.
G.S. Gupta, N. Chakraborti, and T. Sundarajan,Metall. Trans. B, 20B (1989), pp. 925–934.
H.E. Flynn, A.E. Morris, and D. Carter,Mathematical Modeling of Materials Processing Operations, ed. J. Szekely et al. (Warrendale, PA: TMS, 1987), pp. 901–912.
K.M. Iyer and H.Y. Sohn,Metall. Trans. B, 25B (1994), pp. 207–219.
K.M. Iyer and H.Y. Sohn,Extractive Metallurgy of Copper, Nickel, and Cobalt, Vol. I. Fundamental Aspects, ed. R.G. Reddy and R.N. Weizenbach (Warrendale, PA: TMS, 1993), pp. 223–243.
W.E. Wahsiedler, in Ref. 63,, pp. 643–670.
S. Asai,Metallurgical Processes for the Year 2000 and Beyond, ed. H.Y. Sohn and E.S. Geskin (Warrendale, PA: TMS, 1989), pp. 17–36.
V.R. Voller, S.P. Marsh, and N. El-Kaddah, ed.Materials Processing in the Computer Age (Warrendale, PA: TMS, 1994).
J. Szekely et al., ed.,Magnetohydrodynamics in Process Metallurgy (Warrendale, PA: TMS, 1991).
M. Bello,National Research Council News Report, 39 (9) (1989), pp. 10–12.
H.Y. Sohn,Metall. Trans. B, 22B (1991), pp. 737–754.
H.Y. Sohn, ed.,Metallurgical Processes for the Early Twenty-First Century, Vol. I Basic Principles, ed. H.Y. Sohn (Warrendale, PA: TMS, 1994).
H.Y. Sohn, ed.,Metallurgical Processes for the Early Twenty-First Century, Vol. II Technology and Practice (Warrendale, PA: TMS, 1994).
H.Y. Sohn and E.S. Geskin,Metallurgical Processes for the Year 2000 and Beyond (Warrendale, PA: TMS, 1988).
J. Singh and S.M. Copley, ed.,Novel Techniques in Synthesis and Processes of Advanced Materials (Warrendale, PA: TMS, 1994).
E.V. Barrera et al., ed.,In Situ Reactions for Synthesis of Composites, Ceramics, and Intermetallics (Warrendale, PA: TMS, 1995).
V.A. Ravi, T.S. Srivatsan, and J.J. Moore, ed.,Processing and Fabrication of Advanced Materials III (Warrendale, PA: TMS, 1994).
P. Kumar, H.A. Jehn, and M. Uz, ed.,Processing and Application of High Purity Refractory Metals and Alloys (Warrendale, PA: TMS, 1994).
H. Henein and T. Oki, ed.,First International Conference on Processing Materials for Properties (Warrendale, PA: TMS, 1993).
P.B. Queneau and R.D. Peterson, ed.,Recycling of Metals and Engineered Materials, Third International Symposium (Warrendale, PA: TMS, 1995).
J.P. Hager et al., ed.,Treatment and Minimization of Heavy Metals-Containing Wastes (Warrendale, PA: TMS, 1995).
J.P. Hager et al., ed.,Extraction and Processing for the Treatment and Minimization of Wastes (Warrendale, PA: TMS, 1993).
J.H.L. van Linden, D.L. Stewart, and Y. Sahai,Recycling of Metals and Engineered Materials, Second International Symposium (Warrendale, PA: TMS, 1990).
P.R. Taylor, H.Y. Sohn and N. Jarret, ed.,Recycle and Secondary Recovery of Metals (Warrendale, PA: TMS, 1985).
R.G. Reddy,JOM, 41 (4) (1989), pp. 66–69; 40 (4) (1988), pp. 46–51; 39 (4) (1987), pp. 34–39; 38 (4) (1986), pp. 49–55; 37 (4) (1985), pp. 69–73.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Sohn, H.Y. R&D in the metallurgical industry toward the 21st century. JOM 49, 33–37 (1997). https://doi.org/10.1007/BF02914872
Issue Date:
DOI: https://doi.org/10.1007/BF02914872