Abstract
A critical survey of available information on primary and secondary cooling as affecting solidification constants, and their validity in mathematical modeling. A review of the mathematics of reciprocation. Comments on the function and mode of mold lubrication. The important effects of the above parameters and of liquid metal handling procedures on the internal and external quality of strand cast billets and slabs.
References
L. S. Rudoi,et al.:Izv. Vyssh. Ucheb. Zaved. Chern. Met., 1971, vol. 12, p. 41, B151 #10151.
L. S. Rudoi,et al.:Izv. Vysch. Ucheb. Zaved., Chem. Met., 1962, vol. 2, p. 52, Hb #5567.
M. S. Gordienko,et al.:Sb. Nauch. Tr., 1965, vol. 11, p. 109, HB #7220.
Volk & Wunnenberg:Kleipzig Fachber, 1972, vol. 80, p. 491, HB #9010.
T. Miyake:Tetsu-To-Hagane, 1974, vol. 60, HB #9318.
Tarmann and Forstener:Radex Rundch, 1966, vol. 1, p. 51, HB #6867.
W. Holzbruber and B. Tarmann:Steel Times, 1967, Aug. 25, vol. 195, p. 217.
H. Muller and R. Jeschar:Arch. Eisenhuettenw., 1973, vol. 44, p. 589, HB #9126.
H. Graichen:Die Technique, 1967, vol. 22, p. 500, HB #7357.
U.S. Patent #1908, George Sellers.
Junk;Neue Huette, 1972, vol. 17, p. 13, HB #8740.
E. A. Mizikar:Trans. TMS-AIME, 1967, vol. 239, p. 1747.
W. R. Irving:J. Iron Steel Inst., 1967, vol. 205, p. 271.
K. Cliff and R. J. Dain:J. Iron Steel Inst., 1967, vol. 205, p. 278.
V. T. Lebedev and D. P. Evteev:Stal., 1973, vol. 4, p. 315.
J. Savage and W. H. Prichard:J. Iron Steel Inst., 1954, vol. 178, p. 269.
M. Bundeis and H. Muller:Berg. Huettenmann. Montash., 1965, vol. 114, p. 115, HB #8191.
H. G. Baumann:Stahl Eisen, 1969, vol. 89, p. 1467, BISI #8392.
A. Moriyama and I. Muchi:Tetsu-To-Hagane, 1969, vol. 55, p. 682, BISI #8034.
L. S. Rudoi and A. P. Kongaklin:Izv. Vysssh Ucheb. Zaved. Chern. Met., 1971, vol. 12, p. 4, BISI #10151.
M. A. Soliman, J. Szekely, and Walt Ray: unpublished research.
R. Albemy:Circ. Inform.-Technol., 1973, vol. 3, p. 763, BISI #11633.
J. J. Gautier,et al.:J. Iron Steel Inst., 1970, vol. 208, p. 1053.
Springorum:Steel Times, 1969, vol. 197, p. 727.
Y. Aketa,et al.:Tetsu-To-Hagane, 1959 vol. 45, p. 1341, HB #5223.
V. S. Rutes,et al.:Liteinoe Proizvod., 1958, vol. 9, p. 11, HB #4554.
Grill, Brimacombe, and Weinberg: presented at the 104th AIME Meeting, February 17, 1975.
L. I. Morozenskii,et al.:Stal., 1965, vol. 4, p. 272.
N. G. Gladyshev:Izv. Vyssh. Ucheb. Zaved., Chem. Met., 1965, vol. 5, p. 40, HB #6507.
T. Oita: Iron Steel Eng., Sept. 1965, vol. 42, p. 169, discussion by D. J. Knight and F. T. Osborne of Atlas Steel Co.
M. L. Samways,et al.:J. Metals, 1974, vol. 26, no. 10, p. 28.
A. I. Chizhikov:Izv. Vyssh. Ucheb. Zaved., Chem. Met., 1968, vol. 11, p. 53, HB #7420.
E. A. Iodko:Izv. Vyssh. Ucheb. Zaved., Chem. Met., 1960, vol. 12, p. 31, HB #5082.
E. A. Iodko:Izv. Vyssh. Ucheb. Zaved., Chem. Met., 1961, vol. 11, p. 60 HB #5472.
A. A. Skvortsov:Izv. Vyssh. Ucheb. Zaved., Chem. Met., 1961, vol. 17, p. 78, HB #5347.
T. V. Sladkoshteev,et al.:Continuous Casting of Steel, p. 126: Metallurgizdat Press, Moscow, 1970, HB #8594.
D. B. Evteev:Berg. Huettenmann. Montash., 1966, vol. 11, p. 238 HB #6973.
W. T. Langford:Met. Trans., 1972, vol. 3, p. 1331.
J. Vrsek:Hum. Listy, 1967, vol. 22, p. 88, HB #7387.
W. F. Pontius and C. R. Taylor:Proc. Elect. Furnace Conf., 1967, vol. 25, p. 40.
K. Kawakami,et al.:Tetsu-To-Hagane, 1972, vol. 58, p. S-402, HB #8907.
F. Listhuber,et al.: Iron Steel Eng., 1974, vol. 51, #492.
K. Asano:Tetsu-To-Hagane, 1973, vol. 59, p. 582. HB #9099.
K. Asano,et al.: Tetsu-To-Hagane, 1974, vol. 60, HB.
V. I. Askol'dov,et al.:Stal., 1971, vol. 11, p. 996, BISI #10020.
R. Shultz:Bull. Amer. Ceram. Soc., 1973, vol. 52, p. 833, #11.
Additional information
The Howe Memorial Lecture was established in 1923 by the Iron and Steel Division, now the Iron and Steel Society, of AIME. The Lecturer is selected for his outstanding contributions to the science and practice of iron and steel metallurgy or metallography.
CHARLES R. TAYLOR, now retired, delivered this lecture as Manager of Melting, Refining, and Refractories Research. Research and Technology: Armeo Steel Corporation, Middlettown, Ohio, having served the firm in various technical and managerial capacities since 1933. He received his B.S. degree in chemistry from Ohio State University in 1932, followed by an M.S. in 1933. As Armeo Steel Corporation Fellow, he earned a D.Sc. in physical chemistry from the University of Cincinnati in 1941. His many professional activities in the AIME include active participation in the Physical Chemistry of Steelmaking Committee (now Process Technology Committee) from 1942 to date, (Chairman 1950); Chairman of the Iron and Steel Division of The Metallurgical Society of AIME in 1964; Board of Directors ISD-1962-66; Board of Directors—The Metallurgical Society—1966–73; Board of Directors—AIME 1968–73; President of The Metallurgical Society—1971–72: McCune Award—1946—Iron and Steel Division, AIME; ASM Fellow—1974. He is holder of several patents and author of numerous papers; co-author of a Chapter in “Electric Furnace Steelmaking.”
Rights and permissions
About this article
Cite this article
Taylor, C.R. Continuous casting update. Metall Trans B 6, 359–375 (1975). https://doi.org/10.1007/BF02913820
Issue Date:
DOI: https://doi.org/10.1007/BF02913820