Cited References
M. Kobayashi, “On the Phase Diagram of Tellurium with Cadmium and Tin,”Z. Anorg. Chem., 69, 1–6 (1911) in German. (Equi Diagram; Experimental)
J.H. McAteer and H. Seltz, “Thermodynamic Properties of the Tellurides of Zinc, Cadmium, Tin and Lead,”J. Am. Chem. Soc., 58(11), 2081–2084 (1936). (Thermo; Experimental)
W.D. Lawson, S. Nielsen, E.H. Putley, and A.S. Young, “Preparation and Properties of HgTe and Mixed Crystals of HgTe-CdTe,”J. Phys. Chem. Solids, 9, 325–329 (1959). (Equi Diagram; Experimental)
D. DeNobel, “Phase Equilibria and Semiconducting Properties of Cadmium Telluride,”Philips Res. Repts, 14, 361–399 (1959). (Equi Diagram, Thermo; Experimental)
I.V. Korneeva, A.V. Belyaev, and A.V. Novoselova, “Determination of the Saturated Vapor Pressure of Solid Zinc and Cadmium Tellurides,”Russ. J. Inorg. Chem., 5(1), 1–3 (1960). (Thermo; Experimental)
A.L. Edwards and H.G. Drickamer, “Effect of Pressure on the Absorption Edges of Some II–V, II–VI, and I–VII Compounds,”Phys. Rev., 122, 1149–1157 (1961). (Equi Diagram; Experimental)
D.R. Mason and D.F. O’Kane, Preparation and Properties of Some Peritectic Semiconducting Compounds,” Academic Press Inc., New York, New York (1961). (Equi Diagram; Experimental)
M.R. Lorenz, “Phase Equilibria in the System Cd-Te,”J. Phys. Solids, 23, 939–947 (1962). (Equi Diagram; Experimental)
M.R. Lorenz, “The Solid-Vapor Equilibrium of CdTe,”J. Phys. Chem. Solids, 23, 1449–1451 (1962). (Thermo; Experimental)
G.A. Samara and H.G. Drickamer, “Pressure Induced Phase Transitions in Some II–VI Compounds,”J. Phys. Chem. Solids, 23, 457–461 (1962). (Equi Diagram; Experimental)
A. Jayaraman, W. Klement, and G.C. Kennedy, “Melting and Polymorphic Transitions for Some Group II–VI Compounds at High Pressures,”Phys. Rev., 130(6), 2277–2283 (1963). (Equi Diagram; Experimental)
B.M. Kulwicki, “The Phase Equilibria of Some Compound Semiconductors by Differential Thermal Analysis (DTA) Calorimetry,” Ph.D. Thesis, The University of Michigan, Ann Arbor, Michigan, USA (1963). (Equi Diagram, Thermo; Experimental)
A.N. Mariano and E.P. Warekois, “High Pressure Phases of some Compounds of Groups II–VI,”Science, 142, 672–673 (1963). (Crys Structure; Experimental)
N.B. Owen, P.L. Smith, J.E. Martin, and A.J. Wright, “X-Ray Diffraction at Ultra-High Pressures,”J. Phys. Chem. Solids, 24, 1519–1524 (1963). (Equi Diagram, Crys Structure; Experimental)
P.L. Smith and J.E. Martin, “The High-Pressure Structures of Cadmium Sulphide and Cadmium Telluride,”Phys. Lett., 6(1), 42 (1963). (Crys Structure; Experimental)
L. Thomassen, D.R. Mason, G.D. Rose, J.C. Sarace, and G.A. Schmitt, “The Phase Diagram for the Pseudo-Binary System CdTe-In2Te3,”J. Electrochem. Soc., 110, 1127–1131 (1963). (Equi Diagram, Crys Structure; Experimental)
R.F. Brebrick and A.J. Strauss, “Partial Pressures and Gibbs Free Energy of Formation for Congruently Subliming CdTe(c),”J. Phys. Chem. Solids, 25, 1441–1445 (1964). (Thermo; Experimental)
P. Goldfinger and M. Jeunehomme, “Mass Spectrometric and Knudsen-Cell Vaporization Studies of Group IIB–VIB Compounds,”Trans. Faraday Soc., 59, 2851–2867 (1964). (Thermo; Experimental)
S.D. Gromakov, I.V. Zoroatskaya, Z.M. Latypov, M.A. Chvala, E.A. Eidel’man, L.I. Badysina, and L.G. Zaripova, “Method of Studying the Equilibrium Diagrams of Semiconducting Systems,”Z. Neorg. Khim., 9(10), 2485–2487 (1964) in Russian; TR:Russ. J. Inorg. Chem., 9(10), 1340–1341 (1964). (Equi Diagram; Experimental)
A.S. Pashinkin, “Calculation of Vapour Pressure in Measurements by the Knudsen Method for Completely Dissociated Compounds,”Russ. J. Phys. Chem., 38(11), 1461–1463 (1964). (Thermo; Theory)
J. Terpilowski and E. Ratajczak, “Thermodynamic Properties of CdSe and CdTe,”Bull. Akad. Polonaise Sci., 12, 355–358 (1964). (Thermo; Experimental)
M.J. Pool, “Calorimetric Investigation of Cadmium, Silver, and Zinc Tellurides,”Trans. AIME, 223(9), 1711–1715 (1965). (Thermo; Experimental)
I. Prigogpine and R. Defay,Chemical Thermodynamics, Longmans Green and Co., London, 410–411 (1965).
P.M. Robinson and M.B. Bever, “On the Thermodynamic Properties of the Tellurides of Cadmium, Indium, Tin, and Lead,”Trans. AIME, 236(6), 814–817 (1966). (Thermo; Experimental)
P.M. Robinson and J.S. LI. Leach, “The Heat Effects Accompanying the Solution in Liquid Bismuth of Tellurium with Cadmium, Indium, Tin, or Lead,”Trans. AIME, 236(6), 818–821 (1966). (Thermo; Experimental)
I.Y. Borg and D.K. Smith, Jr., “X-Ray Diffraction Studies on CdTe at High Pressure,”J. Phys. Chem. Solids, 28, 49–54 (1967). (Equi Diagram, Crys Structure; Experimental)
L.A. Sysoev, E.K. Raiskin, and V.R. Gur’ev, “Measurement of the Melting Point of Sulfides, Selenides and Tellurides of Zn and Cd,”Izv. Akad. Nauk SSSR, Neorg. Mater., 3(2), 390–391 (1967) in Russian; TR:Inorg. Mater., 3(2), 341–342 (1967). (Equi Diagram; Experimental)
A.F. Demidenko, “Heat Capacities of Cadmium Sulfide, Selenide, and Telluride Between 55 and 300 K,”Izv. Akad. Nauk SSSR, Neorg. Mater., 5(2), 252–255 (1969) in Russian; TR:Inorg. Mater., 5(2), 210–212 (1969). (Thermo; Experimental)
A. Onodera, “High Pressure Transition in Cadmium Telluride,”Rev. Phys. Chem. Jpn., 39(2), 78–92 (1969). (Equi Diagram, Pressure; Experimental)
Yu.Kh. Shaulov and E.N. Kostina, “Heat Capacity and Entropy of Cadmium Telluride at Low Temperatures,”Russ. J. Phys. Chem., 43(2), 256–258 (1969). (Thermo; Experimental)
A.V. Vanyukov, A.A. Davydov, and A.S. Tomson, “Vapour Pressure of Cadmium Telluride at High Temperatures,”Russ. J. Phys. Chem., 43(9), 1324–1325 (1969). (Thermo; Experimental)
M.G. Williams, R.D. Tomlinson, and M.J. Hampshire, “X-Ray Determination of the Lattice Parameters and Thermal Expansion of Cadmium Telluride in the Temperature Range 20–420 Degrees Celsius,”Solid State Commun., 7, 1831–1832 (1969). (Crys Structure; Experimental)
A.S. Jordan, “A Theory of Regular Associated Solutions Applied to the Liquidus Curves of the Zn-Te and Cd-Te Systems,”Metall. Trans., 1(1), 239–249 (1970). (Equi Diagram, Thermo; Theory)
J. Steininger, A.J. Strauss, and R.F. Brebrick, “Phase Diagram of the Zn-Cd-Te Ternary Systems,”J. Appl. Phys., 117(10), 1305–1309 (1970). (Equi Diagram; Experimental)
R.F. Brebrick, “Partial Pressures in the Cd-Te and Zn-Te Systems,”J. Electrochem. Soc., 118(12), 2014–2020 (1971). (Equi Diagram, Thermo; Experimental)
A.P. Rusakov, Yr. Kh. Vekilov, and A.E. Kadyshevich, “Specific Heats of CdTe and HgTe and Their Vibrational Frequency Spectra,”Fiz. Tverd. Tela, 12(11), 3238–3243 (1970) in Russian; TR:Sov. Phys.-Solid State, 12(11), 2618–2621 (1971). (Thermo; Experimental)
A.S. Tomson, A.A. Davydov, and S.M. Grigorovich, “Phase Equilibrium in the System Cd-Te,”Izv. Akad. Nauk SSSR, Neorg. Mater., 8(11), 1905–1907 (1972) in Russian; TR:Inorg. Mater., 8(11), 1674–1676 (1972). (Equi Diagram; Experimental)
K.C. Mills,Thermodynamic Data for Inorganic Sulphides, Selenides and Tellurides, Buttersworth, London, 51–76 (1974). (Thermo; Review)
T. Tung, L. Golonka, and R.F. Brebrick, “Thermodynamic Analysis of the HgTe-CdTe-Te System Using the Simplified RAS Model,”J. Electrochem. Soc., 128(7), 1601–1612 (1981). (Equi Diagram, Thermo; Theory)
J.D. Kelley, B.G. Martin, F.R. Szofran, and S.L. Lehoczky, “Application of the Regular Associated Solution Model to the Cd-Te and Hg-Te B Binary Systems,”J. Electrochem. Soc., 129(10), 2360–2365 (1982). (Equi Diagram; Theory)
R. Kikuchi, “Liquidus Calculation of II–VI Compound Semiconductors,”Calphad, 6(1), 1–10 (1982). (Equi Diagram, Thermo; Theory)
R. Kikuchi, “Theoretical Calculation of Hg-Cd-Te Liquidus-Solidus Phase Diagram,”J. Vac. Sci. Technol., 21(1), 129–132 (1982). (Equi Diagram, Thermo; Theory)
T. Tung, C. Su, P. Liao, and R.F. Brebrick, “Measurement and Analysis of the Phase Diagram and Thermodynamic Properties in the Hg-Cd-Te System,”J. Vac. Sci. Technol., 21(1), 117–124 (1982). (Equi Diagram, Thermo; Theory)
Author information
Authors and Affiliations
Additional information
R. C. Sharma was Visiting Assistant Professor, 1984–1986, on leave from the Indian Institute of Technology, Kanpur, U.P.208016, India. This work was funded by ASM INTERNATIONAL. Literature searched through 1984. Professor Chang is ASM/NIST Data Program Category Editor for selected binary Group II–VI and III–V alloys.
Rights and permissions
About this article
Cite this article
Sharma, R.C., Chang, Y.A. The Cd-Te (cadmium-tellurium) system. Bulletin of Alloy Phase Diagrams 10, 334–339 (1989). https://doi.org/10.1007/BF02877588
Issue Date:
DOI: https://doi.org/10.1007/BF02877588