Abstract
The objective of this study is to investigate the local stress fluctuation in two-phase composite by homogenization method. The composite was described by homogeneous macro structure and periodical micro structure simultaneously and the mechanical response of the composite can be described based on both macro and micro dimensional scales. Micro and macro homogenization problems can be formulated. The effective material properties of the composite and the local stress field in the microstructure of the composite can be determined by solving these equations.
Similar content being viewed by others
Reference
C C Chamis. Simplified Composite Micromechanics Equations for Hygral, Thermal and Mechanical Properties.SAMPE Quarterly, April 1984: 14–23
Kikuchi N. An Optimal-Design Method of Microstructure Using the Homogenization Method.Transactions of the Materials Research Society of Japan, 1994, 16(355): 461–466
Hassani B, Hinton E. A Review of Homogenization and Topology Optimization I-Homogenization Theory for Media With Periodic Structure.Computers & Structures, 1998, 69(6): 707–717
Hassani B, Hinton E. A Review of Homogenization and Topology Optimization III-Topology Optimization Using Optimality Criteria.Computers & Structures, 1998, 69(6): 739–756
Jose Miranda Guedes and Noboru Kikuchi. Preprocessing and Postprocessing for Materials Based on the Homogenization Method With Adaptive Finite Element Methods.Computer Methods in Applied Mechanics and Engineering, 1990, 83: 143–198, North-Holland
O C Zienkiewicz and R L Taylor.The Finite Element Method. Fourth Edition. McGraw-Hill, London, 1989
Wang Xucheng, Shao Min.The Basic Principles and Numerical Methods of Finite Element Method. Beijing: Tsinghua University Press, 1997
Author information
Authors and Affiliations
Corresponding author
Additional information
Funded by National High-Tech Foundation (State 863 Plan) (No. 2003AA305920)
Rights and permissions
About this article
Cite this article
Aiqing, N., Yiwen, Z. & Jihui, W. Determination of the micro stress field in composite by homogenization method. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 21, 114–117 (2006). https://doi.org/10.1007/BF02861486
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02861486