Abstract
Pb (Mn1/3Sb2/3) x (Zn1/3Nb2/3) y (Zr0.535Ti0.465)1-x-yO3 (PMZN) piezoelectric ceramics were fabricated. The effects of sintering temperature and heat-treatment time on properties were discussed, the optimum preparation technology parameters were obtained. In this case, the ceramics have the highest electromechanical coupling coefficients and mechanical quality factor and the least dielectric loss. It is revealed that the PMZN piezoceramics material can be utilized for high-power ultrasound transducers.
Similar content being viewed by others
References
Cui Wanqui, Zhou Jing, Liu Shuman. Study on Structure and Properties of PMMN Piezoelectric Ceramics.Journal of Wuhan University of Technology-Mater. Sci. Ed., 1995, 10(2): 22–26
Zhou Jing, Chen Wen, Xu Qing. Study of Dielectric Properties for PMZN Piezoceramic.Piezoelectric & Acoustooptics, 2001, 23 (6):437–442
Yang Zupei, Qu Shaobo, Gao Feng,et al. Preparation of 0. 8PMN-0.2PT Ceramics by Molten Salt Synthesis and Its Dielectric Properties.Chinese Journal of Materials Research, 2000, 14 (suppl): 163–167
Kenji Uchino. High Electromechanical Coupling Piezoelectrics: Relaxor and Normal Ferroelectric Solid solutions.Solid State Ionics, 108(1998)43–52
C Galassi, E Roncari, C Capiani,et al. Processing and Characterization of High Qm Ferroelectric Ceramics.Journal of European Ceramic Society, 19(1999)1237–1241
Author information
Authors and Affiliations
Additional information
ZHOU Jing : Born in 1970
Rights and permissions
About this article
Cite this article
Jing, Z., Wen, C., Hua-jun, S. et al. Effects of sintering technology on PMZN piezoceramics properties. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 17, 27–29 (2002). https://doi.org/10.1007/BF02852628
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02852628