Abstract:
A review on methods for controlling the dimensional stability of particleboards. a second pressing at the same temperature as the first Pressing may possibly have three main effects on PF resin bonded particleboard durability: (a) the effect of mechano-sorptive behaviour; (b) the effect of softening of cell wall polymers; (c) the improvement of cure of PF resins. Effects (a) and (b) may accelerate the removal of the recoverable part of residual compressive strain replace of it with the development of the viscous component, thus, relax the compressive stresses.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Armstrong, L. D. and R. T. Kingston. 1960. Effect of moisture changes on creep of wood. Nature, vol. 185, 862–863.
Back, E. L., L. Salinen and G. Richardson. 1983. Transient effects of moisture sorption on the strength properties of paper and wood based materials. Svensk Paper Stidning, R61–R71.
Bolton, A. J., P. E. Humphrey and P. K. Kavvouras. 1989a. The hot pressing of dry-formed wood-based composites, Part 3. Holzforschung, 43 (4): 265–274.
Bolton, A. J., P. E. Humphrey and P. K. Kavvouras. 1989b. The hot pressing of dry-formed wood-based composites. Part 4 Holzforschung, 43 (5): 345–349.
Heannon, R. F. S. and J. M. Paton. 1964. Moisture content changes and creep of wood. For Prod. J. 14 (8): 357–359.
Heebink, B.G. and F. V. Hefty. 1969 Steam treatment to reduce thickness swelling of phenolicbonded particleboard. For. Prod. J. 19(11): 17–26.
Hsu, W. E. 1985. Improvements in dimensional stability of warferboard. part 2: A process for stabilizing warferboard. Report to Canadian For. Serv., Forintek Canada Co. Eastern Lab.
Hunt, D.G. and C. F. Shetton. 1987. Progress in the analysis of creep in wood during concurrent moisture changes. J. Material sci. vol. 22: 313–320.
Kamke, F. E. and L. J. Casey. 1988a. Gas pressure and temperature in the mat during flakeboard manufacture. For. Prod. J. 38 (3): 41–43.
Kamke, F. E. and L. J. Casey. 1988b. Fundamentals of flakeboard manufacture internal-mat conditions. For. Prod. J. 38 (6): 38–44.
Lehmann, W. F. 1964. Retarding dimensional changes in particleboards. Information Circular 20, Oregon State University, Corvallis.
Maku, T. and H. Sasaki. 1956. Some factors which affect swelling properties of chipboard. Composite Wood, 3: 135–139.
Rice, R.W. and R. L. Youngs. 1990. The mechanism and development of creep during drying of red oak. Holz als Roh-und Werkstoff, 48: 73–79.
Suchsland, O. and R. C. Enlow. 1968. Heat treatment of exterior particleboard. For. Prod. J. 18 (8): 24–28.
Tobolsky, A. and M. C. Shen. 1963. The effect of hydrogen bonds on the viscoelastic properties of amorphous polymer network. J. Phys. Chemi. vol 67: 1886–1891.
Tomimura, Y. and T. Matsuda: 1986. Particleboard made of steamed flakes. Mokuzai Gakkaishi, 32 (3): 170–175.
Wang, F. H. 1992. Stress relaxation in phenol formaldehyde bonded particleboards. Ph. D. thesis, University College of North Wales.
Wang, J. Z., M P. Wolcott, F. A. Kamke and D. A. Dillard 1989. Transient moisture effects in fibers and composite Materials. Contemporary Issues in Design-11.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Fenghu, W., Fangtian, D. Particleboard stress relaxation throughout mechano-sorptive creep of gluelines. J. Northeast For. Univ. 7, 73–76 (1996). https://doi.org/10.1007/BF02843061
Issue Date:
DOI: https://doi.org/10.1007/BF02843061