Abstract
The composition, microstructures and properties of SiC/Al2O3/Al−Si composites formed by reactive penetration of the molten aluminum into the preforms of SiO2 and SiC were investigated. The composition of the composites was measured by X-ray diffraction (XRD). The microstructures of the composites were also measured by scanning electron microscopy (SEM) and optical microscopy. In addition, the factors affecting the properties of the composites were discussed. The experiments show that the mechanical properties of the composites depend on their relative densities and the sizes of the fillers “SiC grains”. The denser the SiC/Al2O3/Al−Si composites, the higher their bending strength. As the filler “SiC grains” become fine, the bending strength of the composites increases.
Similar content being viewed by others
References
William B Hilling. Silicon and Silicon Carbide Composites.Am. Ceram. Soc. Bull., 1994, 73(4): 56–60
P Popper. The Preparation of Dense Self-Bonded Silicon Carbide. Special Ceramic., 1996: 209–213
W B Johson, T D Claar and G H Shirolg. Preparation and Processing of Platelet—Reinforced Ceramic by the Directed Reaction of Zirconium with Boron Carbide. Ceram.Eng. Sci. Proc., 1989, 10(7–8): 588–598
R E Loehman Kevin Ewsuk and A P Tomsia. A1203/Al Composites Formed by Reactive Penetration.J. Am. Ceram. Soc., 1996, 79(1): 27–32
Xiya Zhou, Deng Zaide, Yin Tinzao. Al203/Al−Si Composites Formed by Reactive Penetration.Key Engineering Materials, 1999, 161–163: 99–102
Author information
Authors and Affiliations
Additional information
ZHOU Xi-ya: Born in 1966
Funded by the National Natural Science Foundation of China(No. 59602010)
Rights and permissions
About this article
Cite this article
Xi-ya, Z. The microstructures and properties of SiC/Al2O3/Al−Si composites prepared by reactive penetration. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 19, 45–47 (2004). https://doi.org/10.1007/BF02835058
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02835058