Abstract
This study proposes using centroid of the plane roof surface of a building as control information for registering the aerial im agery relative to the aerial LiDAR data. A majority of the roofs in South Korea are plane roofs. The centroid of the plane roof is extracted from aerial imagery by using the Canny Edge Detector and from aerial LiDAR data by using Local Maxima Filtering. These extracted centroids from LiDAR data are used as control information and exterior orientation parameters of aerial imagery are estimated. Also, exterior orientation parameters of aerial imagery are estimated by using GCPs and the accuracy of registration is evaluated. From the experimental results, the positional accuracy satisfied the error range of 1/5,000 digital map which was prescribed by National Geographic Information Institute of South Korea. From this study, it is found that centroid could be useful source of control information.
Similar content being viewed by others
References
Csatho, B., Schenk, T., and Seo, S. Y. (2003). “Spectral Interpretation based on multisensor fusion for urban mapping.”2nd GRSS/ISPRS Joint Workshop, pp. 8–12.
Delara, R. Jr., Mitishita, E. A., and Habib, A. F. (2004). “Bundle adjustment of images from non-metric CCD camera using Lidar data as control points.”XXth ISPRS Congress, CD-ROM.
Gonzalesz, R.C. (2004).Digital Image Processing using MATLAB, Prentice Hall.
Guoqing, Z. (2004). “Urban 3D GIS from lidar and digital aerial images.”Computers & Geosciences, Vol. 30, pp. 345–353.
Habib, A. F. and Kim, E. M. (2004). “Alternative approaches for utilizing lidar data as a source of control information for photogrammetric models.”XXth ISPRS Congress, CD-ROM.
Habib, A. F., Ghanma, M., and Tait, M. (2004). “Integration of LIDAR and photogrammetry for close range applications.”XXth ISPRS Congress, CD-ROM.
John, C. (1986). “A Computational Approach to Edge Detection.”IEEE Trans. Pattern analysis and Machine intelligence. Vol. PAMI-8, No. 6.
Shenk, T and Castho, B. (2002). “Fusion of Lidar data and aerial imagery for a more complete surface description.”ISPRS International. Archives, Vol. 34 Part 3A, pp. 310–31.
Steger, C. (1996). “On the Calculation of Arbitrary Moments of Polygons.”Technical Report FGBV-96-05. Forschungsgruppe bildverstehen FGBV, Informatik Technische Universitat Munchen.
Wolf, P.R. and Dewitt, B.A. (2000).Elements of Photogrammetry with Applications in GIS, 3rd edition, McGrawHill.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kwak, TS., Kim, YI., Yu, KY. et al. Registration of aerial imagery and aerial LiDAR data using centroids of plane roof surfaces as control information. KSCE J Civ Eng 10, 365–370 (2006). https://doi.org/10.1007/BF02830090
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02830090