Abstract
Positioning of screw holes is an important production procedure for steel construction connecting with bolts. In this paper, a new production method is presented, in which the digital camera is used for taking pictures of screw holes and other techniques are advanced. This paper also indicates that the pixels of CCD chip in photogrammetry should be chosen as all geometric units in an image, such as interior elements and all kinds of distortions. The measure can also simplify the camera calibration for determining the size of non-square pixel.
Similar content being viewed by others
References
Feng W H (2002) Methods for industrial measurement and basic principles of their choices. Geo-spatial Information Science, 5(2):28–36
Feng W H (2001) Establishment of 3D control networks with extra-high accuracy for inspecting and setting our of industrial components. Acta Geodetica et Cartographica Sinica (English Version).
Feng W H (1983) The simple method to set up minicontrol system and its experiments. Bulletin of Surveying and Mapping, 3:23–28 (in Chinese)
Feng W H (1998) Deduction of constraint condition in the calibration of stereo-vision system. Journal of WTUSM, 1(1):33–37 (in Chinese)
Feng W H (2001) The specific character of limit errors in close range photogrammetry. Geo-spatial Information Science, 4(3):50–56
Feng W H (2001) Control work in close-range photogrammetry. Geo-Spatial Information Science, 4(4): 66–72
Feng W H (2000) On calibration of close range cameras. Bulletin of Surveying and Mapping, 10: 1–3 (in Chinese)
Atkinson K B (1980) Developments in close-range photogrammetry-1. London: Applied Science Publishers.
Feng W H (2002) Close range photogrammerty. Wuhan: Wuhan University Press. (in Chinese)
Fraser C (1996) The metric impact of reduction optics in digital cameras. Photogrammetric Record, 15(87): 437–446
Author information
Authors and Affiliations
About this article
Cite this article
Wenhao, F., Jiansong, L., Li, Y. et al. Positioning of screw holes group based on digital camera and digital control drilling. Geo-spat. Inf. Sci. 7, 235–242 (2004). https://doi.org/10.1007/BF02828545
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02828545
Key words
- digital camera
- screw holes
- digital drilling machine
- photogrammetry
- multi-station photogrammetry
- self-calibration
- bundle adjustment