References
V. M. Mel'nik, V. N. Sokolov, et al. “A procedure of three-dimensional reconstruction of the micropattern of the surface of solid bodies according to their stereoscopic images obtained with the help of a scanning electron microscope”,Izv. Ros. Akad. Nauk, Ser. Fiz.,E59, No. 2, 28–34 (1995).
A. Boyde and H. F. Ross, “Photogrammetry and the scanning electron microscope”,Photogrammetrie Record.,8, No. 46, 408–457 (1975).
S. A. Saltykov,Stereometric Metallography [in Russian], Metallurgiya, Moscow (1970).
k. S. Chernyavskii,Stereology in the Science of Metals [in Russian], Metallurgiya, Moscow (1977).
H. Exner and M. Fripan, “Quantitative assessment of three-dimensional roughness, anisotropy, and angular distribution of fracture surfaces by stereometry”,J. Microscopy,138, 161–178 (1985).
A. P. Khusu, Yu. R. Vitenberg, and V. A. Pal'mov,Surface Roughness. Probabilistic Approach [in Russian], Nauka, Moscow (1975).
S. M. El-Soudani, “Profilometrie analysis of fractures”,Metalloghaphy,11, 247–336 (1978).
Additional information
Lutsk State Technical University, Lutsk. Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 36, No. 1, pp. 107–110, January–February, 2000.
Rights and permissions
About this article
Cite this article
Shostak, A.V., Ivanchuk, O.M. Three-dimensional computer modeling of fracture surfaces. Mater Sci 36, 128–132 (2000). https://doi.org/10.1007/BF02805129
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02805129