Abstract
An inductive switched-capacitor (i.e., terminal-inverter SC) oscillator is described in this paper. It is found that the amplitude equation is independent of the capacitor ratio α and high-frequency components introduced by the sampling process are about 50 percent lower than those of a parallel SC oscillator.
Similar content being viewed by others
References
B. J. Hosticka, R. W. Broderson and P. R. Gray,IEEE J. of SC,SC-12, (1977), 600.
J. T. Caves, M. A. Copeland, C. F. Rahim and S. D. Rosenbaum,IEEE J. of SC,SC-12 (1977), 592.
E. A. Vittoz,IEEE. J. of SC,SC-14 (1979), 622.
B. J. White, G. M. Jacobs and G. F. Landburg,IEEE J. of SC,SC-14 (1979), 991.
K. Martin and A. Sedra,IEEE Trans. on CAS,CAS-28 (1981), 576.
K. Martin,IEEE J. of SC,SC-16 (1981) 412.
T. Enomoto, T. Ishihara and Masa-Aki Yasumoto,Electronics Letters 18 (1982), 194.
D. Herbst, B. Hoefflinger, K. Schumacher, R. Schweer, et al.,IEEE J. of SC,SC-14 (1979), 1010.
S. A. Tretter,Introduction to Discrete-Time Signal Processing, New York, John Wiley & Sons, Inc., 1976.
Author information
Authors and Affiliations
About this article
Cite this article
Mingguang, Y. A sinusoidal oscillator using bilinear switched capacitors. J. of Electron. (China) 1, 213–217 (1984). https://doi.org/10.1007/BF02778405
Issue Date:
DOI: https://doi.org/10.1007/BF02778405