Abstract
The effect of refractory additives (alumina, alumosilicate mortar, and zircon concentrate) on the properties of SHS refractories based on silicon carbide is studied. It is shown that introduction of the additives favors enhancement of the compressive strength of the material. The enhancement is especially efficient in the case of an admixture of zircon concentrate. The resistance of the silicon carbide material to corrosion in slags of titanium production and iron foundry production is improved when the content of the additives is increased from 5 to 30%. The addition of zircon concentrate allows the slag-resistance of the silicon carbide material to be increased by a factor of 6, while the effect of alumina and alumosilicate mortar is less pronounced.
Similar content being viewed by others
References
I. S. Kainarskii and É. V. Degtyareva,Silicon Carbide Abrasive Refractories [in Russian], GNTIL po Chernoi i Tsvetnoi Metallurgii, Kharkov (1963).
P. P. Budnikov and A. M. Ginstling,Reactions in Solid Mixtures [in Russian], Izd. Literatury po Stroitel’stvu, Moscow (1971).
I. S. Kainarksii and E. V. Degtyareva,Ogneupory, No. 2, 77–85 (1960).
Author information
Authors and Affiliations
Additional information
Translated from Ogneupory i Tekhnicheskaya Keramika, No. 1, pp. 17–18, January, 1997.
Rights and permissions
About this article
Cite this article
Boiko, T.A., Ivanov, A.B. & Tret’yakova, Z.V. Effect of additives on the properties of silicon carbide-based refractories obtained by self-propagating high-temperature synthesis (SHS). Refract Ind Ceram 38, 21–22 (1997). https://doi.org/10.1007/BF02768229
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02768229