Abstract
A substantial percentage of the metal made today is subjected to shaping operations—mainly rolling. The rolling of sheets, plates, strip, bars, and other products is the most productive and most economical method of plastically deforming metallic semifinished products. However, numerous (sometimes at least several dozen) heatings and annealings are needed to obtain final products in the form of sheets, strip, and small-diameter bars. This sharply reduces the productivity of the process, appreciably increases energy and labor costs, and requires more production space and metal-intensive equipment.
Similar content being viewed by others
References
D. I. Romanov, Resistance Heating of Metals [in Russian], Metallurgiya, Moscow (1981).
P. P. Yastrebov and I. P. Smirnov, Electrical Equipment and Electrical Technology [in Russian], Vysshaya Shkola, Moscow (1987).
I. Ya. Tarnovskii, M. Ya. Brovman, V. N. Serebrennikov, et al., Energy Parameters of the Rolling of Nonferrous Metals and Alloys [in Russian], Metallurgiya, Moscow (1975).
Methods and Equipment for Isothermal Rolling. U.S. Patent Nos. 3.988.913 and 3.988.914.
K. M. Klimov, Yu. S. Burkhanov, and I. I. Novikov, “Reduction in solid friction during the electrically stimulated deformation of metals,” Dokl. Akad. Nauk SSSR,283, No. 1, 116–118 (1985).
A. F. Sprecher, S. L. Mannan, and H. Conrad, “On the mechanisms for the electroplastic effect in metals,” Acta Metall.,34, No. 7, 1145–1162 (1986).
K. M. Klimov, “Role of thermal factors in the electrically stimulated deformation of metals,” Summary of Documents of the VIII All-Union Conference on the Thermophysical Properties of Substances [in Russian], Nauka, Novosibirsk (1988), p. 63.
V. N. Spitsyn and O. A. Troitskii, Electroplastic Deformation of Metals [in Russian], Nauka, Moscow (1985).
O. A. Troitskii, “Electromechanical effect in metals,” Pis'ma Zh. Eksp. Teor. Fiz., No. 10, 18–22 (1969).
K. M. Klimov and I. I. Novikov, “Effect of current pulses on the tension of thin metal wires,” Izv. Akad. Nauk SSSR Met., No. 3, 155–158 (1983).
K. M. Klimov and I. I. Novikov, “On the ‘electroplastic effect’,” Probl. Prochn., No. 2, 98–103, 107–108 (1984).
K. M. Klimov and I. I. Novikov, “Effect of equipment parameters on the “electroplastic effect” recorded in metals,” Izv. Akad. Nauk SSSR, No. 1, 158–161 (1987).
P. D. Goldman, L. R. Motowidlo, and J. M. Galligan, “The absence of an electroplastic effect in lead at 4.2 K,” Scr. Metall.,15, No. 4, 353–356 (1981).
K. M. Klimov, Yu. L. Zarapin, I. I. Novikov, et al., “Method of making ultra-thin sheet composed of refractory and hard-to-deform metals and alloys,” Avt. Svid. No. 547274 SSSR, Byul. Izobr., No. 7, 28 (1977).
I. S. Boglov, V. D. Mutovin, V. I. Nefedov, et al., “Production of precision tungsten foil,” Elektron. Promst., No. 10, 49–50 (1980).
V. D. Mutovin, Yu. L. Zarapin, K. M. Klimov, et al., “Method of making ultra-thin sheet of refractory and hard-to-deform metals and alloys,” Avt. Svid. No. 610596 SSSR, Byul. Izobr., No. 22, 27 (1978).
V. D. Mutovin, K. M. Klimov, O. V. Trakhonitovskaya, et al., “Production of tungsten foil by the electroplastic rolling of wire,” Izv. Akad. Nauk SSSR Met., No. 4, 125–129 (1978).
Yu. L. Zarapin, V. D. Mutovin, and N. A. Chichenev, Production of Precision Sheet of Hard-to-Deform Metals and Alloys [in Russian], Metallurgiya, Moscow (1987).
K. M. Klimov, A. P. Gusenkov, S. K. Kim, and V. A. Gribanovskii, Technology and Mill for Rolling Sheet Metal. RF Patent No. 2.042.443, Byul. Izobr., No. 24 (1995).
Additional information
A. A. Baikov Institute of Metallurgy, Russian Academy of Sciences. Translated from Metallurg, No. 4, pp. 29–33, April, 1997.
Rights and permissions
About this article
Cite this article
Klimov, K.M. Possibilities of the electrically stimulated rolling of metals. Metallurgist 41, 121–126 (1997). https://doi.org/10.1007/BF02767881
Issue Date:
DOI: https://doi.org/10.1007/BF02767881