Abstract
The concept of superposition of the losses in calculating the hydraulic resistance of dust catchers used in the refractory industry is developed and substantiated. A unified method and a calculation procedure are suggested and applied for advancing the dust catcher design.
Similar content being viewed by others
References
I.E. Idel’chik,Aerohydrodynamics of Engineering Equipment [in Russian], Mashinostroenie, Moscow (1983).
Yu. V. Krasovitskii and V. V. Durov,Dust Removal from Gases through Grained Layers [in Russian], Khimiya, Moscow (1991).
Yu. V. Krasovitskii, P. B. Baltrenas, V. I. Éntin, H. M. Anzheurov, and V. F. Babkin,Dust Removal from Industrial Gases in the Refractory Industry [in Russian], Tekhnika, Vilnius (1996).
I. E. Idel’chik,A Reference Book on Hydraulic Resistances [in Russian], Mashinostroenie, Moscow (1975).
G. M. Gordon and I. L. Peisahov,Control of Dust Catching Installations [in Russian], Metallurgiya, Moscow (1973).
V. I. Éntin, Yu. V. Krasovitskii, N. M. Anzheurov, and V. F. Babkin, “Aerodynamic problems of the operation of dust catchers in the production of refractories in towns,” in:Program and Abstracts of Sci.-Eng. Conf. Problems of Ecopolice, Barcelona-Madrid, 28 March-5 April 1998, pp. 34–39.
Yu. V. Krasovitskii, V. I. Éntin, N. M. Anzheurov, and Al Kudah Mohamed Kasim, “Dust removal from aspiration outbursts by grained layers under town conditions,”Ibid, pp. 48-53.
V. I. Éntin, N. M. Anzheurov, E. V. Arkhangel’skaya, and Yu. V. Krasovitskii, “Dust cleaning from gases in the refractory industry,” in:Abstr. Rep. Int. Conf. Resource and Power-Saving Technologies of Building Materials, Parts and Structures, Part 4. Mechanisms and Automatization of Production Processes [in Russian], BelGTASM, Belgorod (1995), pp. 153–154.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Éntin, V.I., Anzheurov, N.M. & Krasovitskii, Y.V. Aerodynamic methods for increasing the efficiency of dust catchers in the production of refractories. 2. Aerohydrodynamic designing of dust catchers. Refract Ind Ceram 39, 299–306 (1998). https://doi.org/10.1007/BF02765086
Issue Date:
DOI: https://doi.org/10.1007/BF02765086