Abstract
The prospects of using aerodynamic methods for improving the efficiency of dust catching in the refractory industry are discussed. The suggested computation models relating the efficiency of dust catchers and the nonuniformity of the distribution of the dust-and-gas flow over the cross section of the device have been tested experimentally. Effective levelling and distributing devices for the dust-and-gas flow have been developed.
Similar content being viewed by others
References
“State Report on the State of the Environment in the Russian Federation in 1995,”, in:Rep. Ministry of Protection of the Environment and Natural Resources [in Russian], ÉKOSinform (1996).
Yu. V. Krasovitskii, P. B. Baltrenas, V. I. Éntin, N. M. Anzheurov, and V. F. Babkin,Dust Removal from Industrial Gases in the Refractory Industry [in Russian], Tekhnika, Vilnius (1996).
J. V. Krasowitskij, N. M. Anzheurov, and V. F. Babkin, “Entwicklung von Schüttschichtfiltern für Luft-und Gasentschtaubung,”Gefahrstoffe, Reinhaltung der Luft,56(11), 425–429 (1996).
N. M. Anzheurov, V. F. Babkin, E. F. Arkhangel’skaya, and Yu. V. Krasovitskii, “The aerodynamics of filters with a stationary granular layer,” in:Abstr. Rep. Post-Grad. Students on Problems of Architecture and Building Science, Mater. 48th and 49th VGASA Conf. [in Russian], VGASA, Voronezh (1995), pp. 38–42.
I. E. Idel’chik,The Aerohydrodynamics of Engineering Apparatuses [in Russian], Mashinostroenie, Moscow (1983).
G. M. Gordon and I. L. Peisakhov,Control over Dust Catching Installations [in Russian], Metallurgiya, Moscow (1973).
N. M. Anzheurov, Yu. V. Krasovitskii, A. V. Malinov, et al., “Mathematical models for optimization of dust catching processes by means of cornfilters,” in:2nd. Int. Conf. Civil Engineering and Environment, 26–27 September, 1996, VTU, Vilnius (1996).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Éntin, V.I., Anzheurov, N.M. & Krasovitskii, Y.V. Aerodynamic methods for improving the efficiency of dust catchers in the production of refractories. 1. General concepts. Computation models. methods of experiment. Design solutions. Refract Ind Ceram 39, 263–266 (1998). https://doi.org/10.1007/BF02765079
Issue Date:
DOI: https://doi.org/10.1007/BF02765079