Abstract
Compositions and methods for preparing various ethylsilicate binders for the production of ceramics and refractories are presented. The physicochemical features of the transformations of the created binders recommended for cast and pressed articles, unshaped mixtures, and coats and adhesives are considered. It is shown that for each filler and design of the material the binder should be chosen so as to provide the specified phase composition and structure
Similar content being viewed by others
References
V. T. Zagoskin, G. D. Semchenko, V. I. Skakun, et al., “A method for fabricating ethylsilicate binder, USSR Invent. Certif. No. 847295,”Otkr. Izobr. Prom. Obraztsy. Tov. Znaki, No. 17,89 (1981).
G. D. Semchenko, “Part. 1. Preparing binders for ceramic production by the sol-gel method. 3. Processes of hydrolysis and gelation in ethylsilicate binders without organic solvents,”Ogneup. Tekh. Keram., No. 5, 3–8 (1999).
G. D. Semchenko, “A binder, USSR Inv. Certif. No. 1184839,”Otkr. Izobr. Prom. Obraztsy. Tov. Znaki, No. 35, 138 (1980). 4. T. P. Markholiya, I. I. Kozelkova, and S. V. Kazakov, “Shaping of the structure of reaction-sintered boron carbide,”Ogneupory, No. 10, 24–25 (1986).
G. D. Semchenko, V. A. Bezlepkin, E. V. Lymar’ et al., “A binder, USSR Inv. Certif. No. 1203073,”Otkr. Izobr., No. 1, 120 (1986).
G. D. Semchenko, “A binder for ceramic refractory articles, USSR Inv. Certif. No. 587130,”Otkr. Izobr. Prom. Obraztsy. Tov. Znaki, No. 1, 68 (1978).
Zj. M. Zuvrovi>c and M. M. Ristic, “Some problems of fabrication of ceramics for electronics,”Sci. Sinter.,14(3), 99–103 (1982).
G. D. Semchenko, “A binder, USSR Inv. Certif. No. 706375,”Otkr. Izobr. Prom. Obraztsy. Tov. Znaki, No. 48, 82 (1979).
G. D. Semchenko, A. V. Dunikov, N. G. Pavlishina, et al., “A binder, USSR Inv. Certif. No. 1165664,”Otkr. Izobr., 25, 89 (1985).
G. D. Semchenko, E. V. Shustikov, and A. B. Ivanov, “A binder for refractory articles, USSR Inv. Certif. No. 1214636,”Otkr. Izobr., No. 8, 131 (1986).
G. D. Semchenko, Yu. V. Plugatyreva, A. B. Ivanov, et al, “A mixture for fabricating lightweight refractory articles, USSR Inv. Certif. No. 1375619,”Otkr. Izobr., No. 7, 101 (1988).
G. D. Semchenko, A. V. Dunikov, L. N. Babaeva, et al., “A method for fabricating a binder, USSR Inv. Certif. No. 1284971,”Otkr. Izobr., No. 3, 106 (1987).
G. D. Semchenko, “A binder, USSR Inv. Certif. No. 1184839,”Otkr. Izobr, No. 38, 138 (1985).
G. D. Semchenko, “Fabrication of abrasive ceramic elements of disk mills from thixotropic mixtures on ethylsilicate binders,”Steklo Keram., No. 4, 16–18 (1997).
G. D. Semchenko, “Use of refractory mixtures and adhesives on ethylsilicate binder for repairing heating units,” in:Abs. Rep. Conf. “Advancing the Technical Level of Consumption of Refractory Articles and Materials for Repairing Metallurgical Heating Units of Basic Engineering Ministries” [in Russian], Volgograd, VNNltmash (1982), pp. 15–18.
Author information
Authors and Affiliations
Additional information
1The previous papers of the series have been published in Nos. 1–3, 5, and 7, 1999.
Rights and permissions
About this article
Cite this article
Semchenko, G.D. A new direction in the creation of ceramic materials with a specified composition and structure. Part 1. Manufacturing binders for the ceramic industry by the solgel method. 5. Preparation and physicochemical properties of ethylsilicate binders for ceramic and refractory production. Refract Ind Ceram 40, 329–333 (1999). https://doi.org/10.1007/BF02762581
Issue Date:
DOI: https://doi.org/10.1007/BF02762581