Abstract
The abrasive capacity of ß’-sialons synthesized by hot pressing of a mixture of powder Si3N4 AI2O3, and A1N is studied as a function of the microstructure and the chemical and phase compositions.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
K. H. Jack,“SiAlONs and related nitrogen ceramics,”J. Mater. Sci.,11(4), 1135–1158(1976).
S. Hampshire, H. K. Park, D. P. Thompson, and K. H. Jack,“a-SiAlON ceramic,”Nature (London),275, 880–882 (1978).
T. Ekstrom and M. Nygren,“SiAlON ceramics,”J. Am. Ceram. Soc.,75(2), 259–279 (1992).
G. Z. Cao and R. Metselaar,“a’-sialon ceramics: a review,”Chem. Mater.,3(2), 242–252 (1991).
C. Yamagishi, K. Tsukamoto, J. Hakoshima, H. Shmiojima, and Y. Aliyama,“Mechanical properties and microstructure of ß-SiAlON — ß-SiC composites by pressureless sintering,”J. Mater. Sci.,27(2), 1908–1912 (1992).
B. Fabbri and M. Dondi,“Situazione e prospettive della preparatione di polveri di ß-SiA1ON da argille ed altri materiali naturali,”Ceramurgia, No. 3/4,114-124 (1990).
N. O. Ivanova, T. A. Boiko, and G. I. Ksandopulo,“Sialon-bearing SHS-refractory,”Ogneup. Tekh. Keram., No. 10, 20–21 (1996).
A. Rosenflanz and I.-W. Chen,“Superplasticity of SiAlON ceramics,”J. Am. Ceram. Soc.,80(6), 1341–1352 (1997).
R. Metselaar,“Terminology for compounds in the Si-AI-O-N system,”J. Eur. Ceram. Soc.,18(1), 183–184 (1998).
E. Kokmeijer, C. Scholte, F. Blomer, and R. Metselaar,“The influence of process parameters and starting composition on the carbothermal production of sialon,”J. Mater. Sci.,20(4), 1261–1267(1990).
I. W. Brown, R. Pompe, and R. Carlsson,“Preparation of sialons by nitrided pressureless sintering technique,”J. Eur. Ceram. Soc.,6(2), 191–200(1990).
M. Patel and P. Prosanna,“SEM studies on formation of sialon from kaolinite clay,”Interceram.,40(8), 593–595 (1991).
Y. W. Cho and J. A. Charles,“Synthesis of nitrogen ceramic powders by carbothermal reduction and nitridation. Silicon aluminum oxynitride (sialon),”Mater. Sci. Technol,7(2), 399–406(1991).
J. E. Gilbert and A. Mosset,“Preparation of ß-sialon from coalmine schists,”Mater. Sci. Technol.,32(10), 1441–1448 (1997).
G. P. Shveikin and V. A. Perelyaev,“Processing mineral and technogenic raw materials by carbothermal reduction,”Izv. Akad. Nauk, Ser. Khim., No. 2,233–245 (1997).
T. Ya. Kosolapova, T. V. Andreeva, T. B. Bartnitskaya, et al.,Nonmetallic Refractory Compounds [in Russian], Metallurgiya, Moscow (1985).
G. S. Oleinik and N. V. Danilenko,“Polytype formation in nonmetallic substances,”Usp. Khim.,66(7), 615–640 (1997).
G. P. Shveikin,“Carbothermal processing of leucoxene of the Yaregskoe oil-titanium deposit,” in:Problems in Creating Special Kinds of Ceramics Based on Natural Mineral Raw Materials [in Russian], Izd. Komi NTs UrO RAN, Syktyvkar (1994), pp. 13–19.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Shveikin, G.P., Smol’nikov, 1.Y.A., Timoshchuk, T.A. et al. Abrasive capacity of ß’-sialons synthesized by hot pressing. Refract Ind Ceram 40, 196–198 (1999). https://doi.org/10.1007/BF02762282
Issue Date:
DOI: https://doi.org/10.1007/BF02762282