Abstract
Determination of the hardness of paint and varnish coatings by the method of dynamic indenting is discussed. Experimental data about the varnish hardness obtained in the process of its hardening with the help of the ITPP-1 instrument are given. The ITPP-1 measurements are analyzed and compared with the data obtained using the conventional M-3 instruments. Advantages of the ITPP-1 have been demonstrated.
Similar content being viewed by others
References
Karyakina, M.I.,Ispytaniya lakokrasochnykh materialov i pokrytii (Testing Paints, Varnishes, and Coatings), Moscow: Khimiya, 1988.
Paints and Varnishes, and Coatings. Theory and Practice, Ed. by R. Lamburn. Translated into Russian under the titleLakokrasochnye materialy i pokrytiya. Teoriya i praktika, St. Petersburg: Khimiya, 1991.
Upravlenie fiziko-mekhanicheskimi svoistvami pokrytii drevesiny (Control over Physical and Mechanical Properties of Wood) (contributions from Zotov, A.A., Krisanov, V.F., Sanaev, V.G., and Ovcharenko, E.E.), Moscow: MGUL, 1998.
Sanaev, V.G., Determination of Hardness of Protecting and Decorating Coatings of Wood and Wooden Materials,Derevoobrabatyvayushchaya Promyshlennost', 1984, no. 4, pp. 5–7.
Rudnitskii, V.A. and Rabtsevich, A.V., Method of Dynamic Indenting for Estimating Mechanical Parameters of Metallic Materials,Defektoskopiya, 1997, no. 4, pp. 79–86.
Batuev, G.S., Golubkov, Yu.V., Efremov, L.K., and Fedosov, A.A.,Inzhenernye metody issledovaniya udarnykh protsessov (Engineering Methods in Studies of Impact Processes), Moscow: Mashinostroenie, 1977.
Hunter, S.C., The Hertz Problem for a Rigid Spherical Indenter and a Viscoelastic Half-Space,J. Mech. Phys. Solids, 1960, vol. 8, pp. 219–234.
Okhrimenko, I.S. and Kolin, V.A., Application of the PMT-3 Instrument to Hardness Measurements of Paint and Varnish Coatings,Lakokrasochnye Materialy i ikh Primenenie, 1962, no. 2, pp. 50–52.
Karyakina, M.I.,Fiziko-khimicheskie osnovy protsessa formirovaniya i stareniya pokrytii (Physical and Chemical Principles of Formation and Aging of Coatings), Moscow: Khimiya, 1980.
Sanzharovskii, A.T.,Fiziko-mekhanicheskie svoistva polimernykh i lakokrasochnykh pokrytii (Physical and Mechanical Properties of Polymer and Paint-and-Varnish Coatings), Moscow: Khimiya, 1978.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kren', A.P., Rudnitskii, V.A. A dynamic method and instrument for measuring hardness of paint and varnish coatings. Russ J Nondestruct Test 36, 375–380 (2000). https://doi.org/10.1007/BF02759423
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02759423