Abstract
The paper describes testing techniques and measurements of the cold strain (up to 50%) and mechanical parameters of the austenite 06Kh16N15M2G2TFR (ChS68) stainless steel obtained by measuring the third critical angle and the velocities of surface waves propagating at different angles with respect to the roll direction, alongside the dynamic hardness of the steel.
Similar content being viewed by others
References
ASTM A771-80. Standard Specification for Austenitic Stainless Steel Tubing for Breeder Reactor Core Components.
Sandovskii, V.A., Uvarov, A.I., and Tereshchenko, N.A., Effect of Plastic Deformation and Annealing of Armco-Iron on Signal from Applied Eddy-Current Transducer,Defektoskopiya, 1999, no. 4, pp. 61–67.
Rodionova, S.S., Kunetsov, I.A., and Gorkunov, E.S., Effect of Cold Plastic Strain on Physical Properties of Brass,Defektoskopiya, 1998, no. 4, pp. 25–31.
Bol'shakov, V.N. and Gorbash, V.G., Instrument for Measuring Mechanical Stress,Defektoskopiya, 1988, no. 6, pp. 26–30.
Bobrenko, V.M., Kutsenko, A.N., and Sheremetikov, A.S., Acoustic Tensometery. II. Techniques and Instruments (review article),Defektoskopiya 1980, no. 12, pp. 59–75.
Kolesnikov, A.E.,Ul'trazvukovye izmereniya (Ultrasonic Measurements), Moscow: Izd. Standartov, 1982.
Sekonyan, S.S., Speed of Sound in Distilled Water,Izmeritel'naya Tekhnika, 1963, no. 4, pp. 53–55.
Brekhovskikh, L.M.,Volny v sloistykh sredakh (Waves in Layered Media), Moscow: Nauka, 1973.
Weston-Bartholomew, W., Use of the Ultrasonic Goniometer to Measure Case Hardening (The Corner Reflection Method),Intern. Adv. in NDT, 1979, vol. b, pp. 111–123.
Leeb, D., Dynamic Hardness Testing of Metallic Materials,NDT Int., 1979, vol. 12, no. 6, pp. 274–278.
Gusyatinskaya, N.S., Kozlov, V.I., and Kochin, O.L., Technique for Testing the Equotype Hardness Gauge,Izmeritel'naya Tekhnika, 1984, no. 5, pp. 31–33.
Aivazyan, S.A., Enyukov, I.O., and Meshalkin, L.D.,Prikladnaya statistika (Applied Statistics), Moscow: Finansy i Statistika, 1985.
Fitzpatrick, G.L. and Hildebrand, B.P., Near-Surface Flaw Detection by Ultrasonic Critical Angle Imaging,J. Nondestr. Eval., 1982, vol. 3, no. 4, pp. 201–220.
Botaki, A.A., Ul'yanov, V.L., and Sharko, A.V.,Ul'trazvukovoi kontrol' prochnostnykh svoistv konstruktsionnykh materialov (Ultrasonic Testing of Strength Characteristics of Structural Materials), Moscow: Mashinostroenie, 1983.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Gorskii, V.V., Khodulev, B.S., Zhdanenko, G.F. et al. Nondestructive measurements of cold strain in plates from austenite stainless steel. Russ J Nondestruct Test 36, 335–343 (2000). https://doi.org/10.1007/BF02759417
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02759417