Abstract
Using the model of the electro-acoustic channel for a multilayered slanted bidirectional transducer, which was developed previously, parameters of the acoustic channel equipped with the emitting and receiving transducers have been calculated. The calculations have been performed in the asymptotic approximation (ray acoustics) in the far-field zone. The calculations have been compared to experimental results.
Similar content being viewed by others
References
Danilov, V.N., On the Calculation of Parameters of the Electro-Acoustic Channel of a Normally Oriented Transducer Operating in the Emitting Mode in an Ultrasonic Flaw Detector,Defektoskopiya, 1996, no. 1, pp. 17–26.
Danilov, V.N., Voronkov, V.A., and Izofatova, N.Yu., Investigation of the Amplitude-Frequency Characteristic of the Acoustic Channel of a Normally Oriented Emitting Transducer, 1996, no. 3, pp. 37–45.
Danilov, V.N., Voronkov, V.A., and Izofatova, N.Yu., Investigation of the Spectral Characteristic of the Acoustic Channel of a Normally Oriented Emitting Transducer,Defektoskopiya, 1996, no. 6, pp. 16–22.
Danilov, V.N., Calculation of Characteristics of the Acoustic Channel in a Flaw Detector Equipped with Normally Oriented Round Transducers,Defektoskopiya, 1996, no. 12, pp. 3–15.
Danilov, V.N., Investigation of a Theoretical Model of the Acoustic Channel of a Flaw Detector Testing a Plane Reflector,Defektoskopiya, 1997, no. 1, pp. 12–24.
Dianov, D.B., Investigation of the Beam Diagram of Prism-shaped Transducers,Defektoskopiya, 1965, no. 2, pp. 8–22.
Danilov, V.N. and Izofatova, N.Yu., Modeling Operation of Electro-Acoustic Channel of a Flaw Detector Equipped with Normally Oriented Transducers and Sounding a Cylindrical Reflector,Defektoskopiya, 1997, no. 7, pp. 65–72.
Danilov, V.N., Calculation of Characteristics of the Electro-Acoustic Channel of a Flaw Detector Equipped with a Bidirectional Slanted Transducer,Defektoskopiya, 1998, no. 8, pp. 28–39.
Danilov, V.N., On Calculation of Characteristics of the Acoustic Channel of a Flaw Detector Equipped with Normally Oriented Transducers in a Transversally Isotropic Medium.Defektoskopiya, 1994, no. 6, pp. 3–14.
Voronkov, V.A., Danilov, V.N., and Petushkova, A.M., On Feasibility of Estimating Dimensions of Surface Cracks Using the Transit-Time Method,Defektoskopiya, 1993, no. 5, pp. 18–24.
Danilov, V.N., Izofatova, N.Yu., and Voronkov, V.A., Comparison between Theoretical and Experimental Investigations of Operation of Bidirectional Normally Oriented Transducers,Defektoskopiya, 1997, no. 6, pp. 39–49.
Ermolov, I.N.,Kontrol' ultrazvukom (Kratkii spravochnik) (Ultrasonic Testing (Concise Reference Book)), Moscow: TsNIITMASh, 1992.
Korolev, M.V. and Karpel'son, A.E.,Shirokopolosnye ultrazvukovye preobrazovateli (Broad-Band Ultrasonic Transducers), Moscow: Mashinostroenie, 1982.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Danilov, V.N. Model of electro-acoustic channel of a flaw detector equipped with emitting and receiving transducers. Russ J Nondestruct Test 36, 315–321 (2000). https://doi.org/10.1007/BF02759414
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02759414