Summary
A method is described for obtaining accurate values for the shrinkage factor of nuclear research emulsions, and for testing the uniformity of the shrinkage with depth. The results obtained from one plate show a shrinkage factor near the surface 6% greater than near the glass. The importance of avoiding such variations, when accurate depth measurements are required, is stressed.
Riassunto
Si descrive un metodo per ottenere accurati valori del fattore di contrazione delle emulsioni per ricerclie nucleari e per saggiare l’uniformità della oontrazione con la profondità. I risultati ottenuti con una lastra rivelano un fattore di oontrazione del 6% inaggiore presso la superficie che non vicino al vetro. Si mette in rilievo l’importanza di evitare tali variazioni quando sono richieste precise misure in profondità.
Similar content being viewed by others
References
P. J. Duke, W. O. Lock, P. V. March andB. A. Munir:Journ. Sci. Instr.,32, 365 (1955).
A. D. Dainton, A. R. Gattiker andW. O. Lock:Phil. Mag.,42, 396 (1951).
J. B. England:Journ. Sci. Instr.,34, 208 (1957).
A. J. Oliver:Rev. Sci. Instr.,25, 326 (1954).
H. S. Carslaw andJ. C. Jaeger:Conduction of Heat in Solids (Oxford, 1947).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Gibson, W.M., McEwen, J.G. Shrinkage of nuclear research emulsions. Nuovo Cim 7, 67–70 (1958). https://doi.org/10.1007/BF02746882
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02746882