Abstract
We have fabricated light emitting diodes (LED) with poly (p-phenylene vinylene) (PPV) as the emissive layer and tin oxide (TO) as the transparent conducting positive electrode and aluminium as the negative electrode. The fabrication conditions are optimized for visible light emission in these TO/PPV/Al LEDs. The threshold voltage for substantial charge injection for visible light emission in these LEDs lies below 10V. The device fabrication and electrical characterization of TO/PPV/Al LEDs are discussed in this communication.
Similar content being viewed by others
References
Antomaidis H, Hsiech B R, Abkowitz M A, Jenekhe S A and Stolka M 1994Synth. Met. 62 263
Baigent D R, Greenham N C, Gruner J, Marks R N, Friend R H, Moratti S C and Holmes A B 1994Synth. Met. 67 3 and references therein
Bradley D D C 1987J. Phys. D. 20 1383
Braun D and Heeger A J 1991Appl. Phys. Lett. 58 1982
Bredas J L and Heeger A J 1994Chem. Phys. Lett. 217 507
Brown A R, Bradley D D C, Burroughes J H, Friend R H, Greenham N C, Burns P L, Holmes A B and Kraft A 1992Appl. Phys. Lett. 61 2793
Burroughes J H, Bradley D D C, Brown A R, Marks R N, Mackay K, Friend R H, Burns P L and Holmes A B 1990Nature 347 539
Grem G, Leditzky G, Ullrich B and Leising G 1992Adv. Mater. 4 36
Karg S, Riess W, Dyakonov V and Schwoerer M 1993Synth. Met. 54 427
Marks R N, Bradley D D C, Jackson R W, Burn P L and Holmes A B 1993Synth. Met. 55–57 4128
Parker I D 1994J. Appl. Phys. 75 1656
Parker I D and Kim H H 1994Appl. Phys. Lett. 64 1774
Roman L S, Yadava Y P, Denicoló G, Arias A C and Hümmelgen I A 1995J. Mater. Sci. Materials in Electronics (in press)
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Hümmelgen, I.A., Yadava, Y.P., Roman, L.S. et al. Tin oxide as a transparent electrode material for light-emitting diodes fabricated with poly (p-phenylene vinylene). Bull. Mater. Sci. 19, 423–427 (1996). https://doi.org/10.1007/BF02744679
Issue Date:
DOI: https://doi.org/10.1007/BF02744679