Abstract
Cavitation erosion of pure titanium metal in molten lead was measured at temperatures varying between 350 and 800°C. Magnetostrictive transducer was used to generate ultrasonic waves at frequency 200 kHz and driving amplitude of 4 µm. The results showed an increase in the weight loss of titanium with increase in both temperature and cavitation noise level. The starting temperature for dissolving titanium in lead changed from 725° at normal conditions, to 600°C when ultrasonic field was applied.
Similar content being viewed by others
References
Abdel Fattah A M 1977Cavitation spectra in molten metals by ultrasonics. Ph.D. Thesis, Cairo University
Bebchuk A S 1956Sov. Phys. Acoust. 2 95
Bebchuk A S 1957Sov. Phys. Acoust. 3 395
Bebchuck A S, Borisov Iv la and Rosenberg L D 1958Sov. Phys. Acoust. 4 372
Esche R 1952Akustiche Beihefte. 4 208
Hansen M and Anderko K 1958Constitution of binary alloys, (New York: McGraw Hill) 1112
Ibisi M and Brown B 1967Jour. Acoust. Soc. Am. 41 568
Iernetti G 1972Acoustica 26 168
Plesset M S and Ellis A T 1961Trans. Am. Soc. Mech. Engg. 77 1055
Rosenberg L D 1960Ultrasonic News 4 16
Sirotyuk M G 1966Sov. Phys. Acoust. 12 67
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Abdel Fattah, A.M., Sidkey, M.A. Cavitational damage of titanium in molten lead. Bull. Mater. Sci. 5, 179–184 (1983). https://doi.org/10.1007/BF02744032
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02744032